Shengli carton Equipment Manufacturing Co.,Ltd |
|
GYK 1270 series high speed corrugated cardboard printing machine is used for high graphic corrugated carton printing, adopt servo lead edge feeder, metal roller, keep the quality highest, slotting, ratory die cutting. Adopt Schneider electrical part and NSK bearing. keep the speed from 80-150pcs/min, big production per day.
910×1800 | 910×2000 | 1270×2200 | 1270×2500 | 1270×2800 | ||
width of inside machine | mm | 2000 | 2200 | 2400 | 2700 | 3000 |
Machine speed | pcs/min | 180 | 180 | 180 | 180 | 180 |
Max. feeding size | mm | 840×1800 | 840×2000 | 1200×2200 | 1200×2500 | 1200×2800 |
Min. feeding size | mm | 280×600 | 280×600 | 380×700 | 380×700 | 380×700 |
Max. printing size | mm | 840×1640 | 840×1840 | 1200×2040 | 1200×2340 | 1200×2640 |
Printing precision | mm | ±0.5 | ±0.5 | ±0.5 | ±0.5 | ±0.5 |
Lead edge feeder system (SUN company of USA)
1.Lead edge feeder system (SUN company of USA)
It adopts USA SUN company lead edge feeding paperboard system can
decrease blocking phenomenon.Adsorb auxiliary feeding paper , it
can make the bending paper feed smoothly , the wind volume can be
adjusted according to paperboard , then make feed paper
precisely.Front baffle adopts manual adjust , back baffle adopts
pneumatic motor adjust , left and right baffle adopts electric
adjustment with dial shows data , its operation is fast , precise
and convenient.It adopts patting device , then paperboard can pat
neatly automatically.Feeding paper wheel adopts PU material to make
with strong friction and long using life.It is equipped with
counting device , it can set and show the production quantity.
2.Machine clutch
1.Electric controlling the clutch of the machine platform and
installed alarms in order to assure the safe of the operator while
the bell rings constantly during marching.Drive shaft is equipped
the clutch in order to avoid the wrong operation damaging the
Machine(if the machine is not locked ,the main motor could not
revolve).Pneumatic type interlocking device.Main motor startup
protection device.Absorb dust device
1.It is equipped the clear dust device (upper wind absorbing ,
clear dust brush) , it can clear the dust and impurity on the
paperboard and increase the printing quality.
4.Feeding paper roller
1.The diameter is 137.8mm
2.Seamless steel tube is packed with the wear resisting rubber and
has gone through the dynamic revise
3.The under feeding paper is chromed
4.The gap between feeding paper rollers adopt manual adjustment ,
the adjusting range is 0-11mm
5.The operating control switch
The control panel adopts 6 inches touching screen , it can control
feeding paperboard department , printing department , die cutting
department and it is easy to operate.
6.Automatically zero device.
Feeding paper department , printing department , die cutting
department adopt electric zero device. Common carton box use the
automatically zero device , after printing two piece , it can
adjust to the correct position and decrease the wasting paper.
2.Printing department
1.Printing roller
1.It adopt steel material , the surface adopts grinding and is
chromed.It has gone through dynamic revise with steady revolving.It
adopt ratchet wheel device to fix the printing plate roller. Whole
printing plate ditch , it is suitable the 9mm hang version bar.Load
and unload the printing plate , the step switch control the
positive and negative revolving. The gap between the printing
roller adopts manual adjustment , the range is 0-11mm.
2.Printing press roller
1.Surface of the steel tube adopt grinding and is chromed.The
roller has gone through the dynamic revise with steady
revolving.The printing press roller adopt manual adjustment , the
adjusting range is 0-11mm.Feeding paper roller gap adopts manual
adjustment , the range is 0-11mm.
Ceramic anilox roller ( anilox roller mesh selection according to customer request )
Roller surface adopts advanced spraying ceramic technology , its
surface is hardness and smooth after grinding and long using
life.The net point adopts laser grave , the shape is hexagonal
honeycomb type and the ink effect is good.
The anilox roller gap adopt manual adjustment with dial shows data.
4.ColorMaster Single Blade System from Sun Automation
Each anilox roller is integrated with one set of colormaster single
blade system, which ensures that only ink in the cells is
transferred to the plant, achieving the high-definition graphic
printing.
5.Upper and under feeding paper roller
The upper roller ,the material is seamless steel tube, it is
equipped with four feeding paper wheel
The under roller , surface of the roller adopts grinding and is
chromed.The gap of feeding paper roller adopt manual adjustment ,
the range is 0-11mm
6.The printing phase adjusting device.
The planet type gear structure.The printing phase adopt PLC ,
touching screen and electric numerical 360 degrees adjust (it can
adjust both revolving and stopping) . The lateral adjustment
range is 20mm with manual adjustment.The printing plate adopt
inverter adjusting the phase . It is quick to zero and adjust the
printing plate, the adjusting printing plate precision is high.
7.The ink circulation
It adopts pneumatic type diaphragm pump , supplying effect is
steady , it is easy operate and maintain.
The ink strainer , it can clear the impurity .
8.The printing phase fixed device.
Pneumatic type brake device when the machine separates or adjusting
the phase , the brake device can restrict the machine revolving and
keep the original gear position.
3.Slotting department
Corrugated Blanks Slotting Unit
1. Pressing line wheel
It adopts seamless steel tube , after two times grinding processing
, the surface is hard chromed. It moves steadily.The pressing wheel
gap adopts manual adjustment with dial shows data , the adjusting
range is 0-11mm.
The pressing line wheel size is equal with the slotting knife , the
pressing line effect is much good.
2.Slotting knife seat device
Electric move transversely : pressing line wheel , the slotting
seat adopt vice board link , equipped with the leading slide
bar,using the ball screw transmission , can make the pressing line
wheel, slotting knife seat move transversely, running smooth and
high precision.Canton box height adjustment : Electric adjustment
(PLC control , both static and dynamic can adjust ) , scale shows.
The upper and below shafts adopt seamless steel tube , after two
times grinding , surfacer of the roller is hard chromed , move
stably. The slotting knife adopt alloy steel. It also has gone
through heat treatment and grinding , the knife shape is saw tooth.
Both the rigidity and toughness are very good.The slotting knife
width is 7.0mm the repair edge knife adopt alloy steel and has gone
through heat treatment and grinding , the knife is sharp and high
precise.The slotting knife seat gap adopts manual adjustment with
dial display.
3. The slotting phase adjusting structure.
Planet gear structure.The slotting phase adopt PLC , touching
screen and electric numerical 360 degrees adjustment (both the
machine stopping and running can adjust.)
4.Die cutting
Corrugated Carton Rotary Die Cutting Unit
Surface of the roller is hard chromed , the roller has gone through
the dynamic revise so it can increase its steady and reliability
when it revolving.Cutter moulder roller and cushion roller adopt
international standard size, the customer can buy the rubber
in any place .The gap between cutter mould roller and cushion
roller adopt electric adjustment , it can set and display the
data.The die cutter phase adopt planet type gear structure , high
precision ,can bear big load strength . It can adjust the phase
within 360 degrees when the machine revolving or stopping.When
stopping feeding paper , the cushion roller will rise up
automatically so it can Decrease the cushion roller attrition.The
cushion roller adopt the Polyurethane felt (super resisting brand)
, it can achieve the 100% cut off rate , the edge is smooth , the
exchange order should be according to the operating handbook.The
cushion roller adopt mechanical cam facility move , the range is
40mm , so it will not cut the same place all the time and prolong
the cushion roller using life.The cutter mould roller can adjust
the lateral distance within ±10mm with manual adjustment. Diameter
of cushion roller and cut mould roller is different , but their
linear velocity is same , it can control the cutter knife will not
cut the same place , the working track of knife is infinite and not
cycle , so the cushion roller can be abrade more even.The linear
velocity compensate device , when the cushion roller diameter
changes ,the compensate device can automatically track and
compensate without the manual adjustment so it ensure the same size
of the carton box and prolong the using life of the cushion and
cutter mold roller.The cushion automatic repairing device can
repair the cushion some times , after repairing , the cushion is
smooth and it possess the same function with the new , so it
increase the utilization rate vastly.
5.Stacking department
Corrugated Blanks Stacking Unit
1.Receiving paper arm
Manual and automatically operation.The receiving paper arm belt ,
adjusting the loosen and tension level alone , it will not be
influenced by the length of the belt.The pilling paper speed can
adjust according to your needs within certain range.
2.The machine platform up and down
Strong chain drive.The pilling height is 1600mm.
The machine platform is equipped with the brake function when up
and down , so the platform will keep the fixed position and will
not glide .
3.The receiving paper baffle.
The pneumatic receiving paper board , when the paper reach the
reserve height , the receiving paper board will automatically
stretch out and hold the paper.The back baffle position adopt
manual adjustment.The belt is crease and can prevent the paperboard
sliding.
6.The drive gear.
1.Main drive gear
1.40Cr alloy steel material , has gone through tempering , high
frequency quenching and gear grinding.
2.Seven grade precision , revolving smooth , low noise , the
hardness is HRC45-50 , long using life , little attrition it can
ensure the printing matching color accuracy.
3.The phase gear adopt 40Cr alloy steel , has gone through
tempering , high frequency quenching and gear grinding,he hardness
is HRC45-50 .
4.The planet gear adopt 20CrMnTi , adopt carburization , nitriding
, quench , temper treatment , the hardness is about HRC58-62.