|
[China]
Trade Verify
Address: Dongguang Industrial Development Zone, Cangzhou City, Hebei Province, China
Contact name:Cathy
Cangzhou Gerun Machinery Co.,Ltd |
|
Verified Suppliers
|
|
|
MY1300 High Speed Fully Automatic Die Cutting And Creasing Machine
| Description |
A.Feeding and Collecting Part
1. The extra feeder can do paper and corrugated board,Install the
vacuum pump of BECKER.
2. At the middle of head install the monitor ,worker can easily see
the back.
3. Pre-paper pile design and special pneumatic bench can save much
time.
4. The non-stop sampling system can check the board accurate
without stop the machine.
B. Positioning Part
1. Additional brush wheels and pressing wheels for thin paper and
corrugated board running.
2. Advance push and pull lay of registration can assure the die
cutting precision.
3. Rikko light front lay detection system prevent the slanting
paper move in main body.
C. Main body
1. Adopt automatic centralized lubricating system and setting main
chain lubricating system by HMI.
2. Patented design shock absorption system can prolong the life of
main body and increase the pressure.
3. The intermittent gearbox made in Taiwan can assure the accurate
registration and decrease the gripper attack.
D.Die-cutting part and Delivery system
1. Diecutting chase fixed accurately by pneumatic lock system.
2. Diecutting plate is putted in and out by air floating device.
3. Electric clutch system of main chain can assure the chain steady
when it is stopped at high speed.
4. Main chain and assist chain is lubricated periodically
controlled by PLC.
5. Protection window of diecutting can hold the main body clean.
6. Lightweight and durable aluminum alloy gripper bars with chain
of Renold UK or IWIS GERMANY ensure accurate.
E. Paper collecting part
1. Back aligning paper, side aligning paper to ensure the automatic
paper feeding orderly, the structure of paper collecting machine is
simple, quick operation. Back aligning paper adjusted by electric,
three times faster than the manual operating, the operation is
simple and convenient.The operator can monitor the back aligning
paper in front of machine.Back aligning paper equips with double
detection switch to monitor paper in order. It can also take
samples when machine running.It will alarm automatically when paper
collecting reach the order to remind the operator replace the paper
collecting platform.
2. Quantitative paper: Can set the arbitrary value from 10 to 9999,
it will off automatically when the paper reaches the set value.
| Parameters |
| Item | Parameters |
| Model | MY-1300 |
| Die cutting type | Pressed flat die cutting(Lower side is movable while upper side is unmovable) |
| Max paper transmitting size | 1320*980 mm |
| Min paper transmitting size | 450*400 mm |
| Max die cutting size | 1300*960 mm |
| Min gripper size | 6-8 mm |
| Max die cutting pressure | 350 N/cm² |
| Paper processed | Cardboard: 200-2000 gsm |
| Max die cutting speed | 4500 sheets/h |
| Max feeding pile height | 1400 mm(above the level) |
| Min feeding pile height | 1250 mm(above the level) |
| Main motor power | 11 kw |
| Total power | ～18 kw |
| Total weight | ～16 T |
| Overall size | 6870*2300*2346 mm (without platform and pre-paper) |
| 7900*4300*2346 mm |
| Packing and Shipping |
1. Adopts moisture-proof and shock-proof packaging which is
suitable for long-distance road.
2. Transportation and various types of weather conditions. A full
set of maintenance and operation.
3. Manuals is included.
| Our Services |
