corrugated paper 3 layer 5 layer 7 layer automatic flute laminating
- Adopting back pusher , back positioning feeding , equipped with
spring side lay and bottom suction system , to make our machine
suitable for all kinds of paper , and keep the good characteristics
of easy operation and convenient maintain .
- The glue roller adopts high design , match with anilox to glue
distributing , the uniformity of coating was improved greatly,
increasing the intensity of draping , reduce the cost of customer
- The steel roller through the balanced treatment and test , match
the tight assembling to make higher stability . And adopting the
timing belt and tooth type belt driving , make the machine running
with higher precision and lower noise.
- Adopting the liquid control system , automatic gluing , and the
glue can be cycle used , avoid glue waste and labor strength .
- Self-developed high-strength feeder with high configuration
electric system make the machine running stable and lower failure
rate, the electric parts adopt international wide available brand
or well-known Chinese brand.
- All material are inspected according to ISO-9001 standard and key
parts as the harmonic gear and bearings are imported ones .
- This machine bottom paper is suitable for A, B , C, D, E, F flute .
It can do 3 layer, 5 layer board to sheet laminating or thick board
to board laminating . The surface paper need 200-600 GSM . With top
paper advance and alignment function .
|Max Laminating Size ( WxL )||1300mm*1100mm||1450mm*1100mm||1600mm*1400mm|
|Min Laminating Size ( WxL )||350mm*350mm||350mm*350mm||450mm*450mm|
|Economical Speed||6000 sheets/h||6000 sheets/h||6000 sheets/h|
|Laminating Precision||<+/- 1.5mm||<+/- 1.5mm||<+/- 1.5mm|
|Total Power||12 kw||12 kw||13 kw|
|Machine Weight||6.8 tons||7.2 tons||8.0 tons|