Active Member
|
[China]
Address: Address：NO.252 Guanzhou Road, Dongguang County , Hebei Province ,China
Contact name:
Hebei Dongguang Packing Machinery Co.,Ltd |
|
|
| Design Speed:200m/min | Economic Speed:150-160m/min | ||
| No. | Name | QTY | Marks |
| 1 | Without shaft mill roll stand | 3 | RS-1500H type, Base paper lifting, clamping, loosening, left shift, right shift are hydraulic control, multiple brakes, sawtooth chuck, , the maximum paper diameter 1500mm.Hydraulic valve made in Tianyuan . |
| 2 | Hydraulic railing and trolley | 6 | Including 10 sets of track and trolley |
| 3 | Preheater (Facer paper) | 1 | MH-900T-2200.Diameter of pre-heater roll:￠900mm,adjust the electric preheating area, water valve for the Shanghai brand, with safety protection cover |
| 4 | Cassette Single Facer | 1 | The main bearing adopts NSK brand. The coating section adopts independent transmission. Adjusts the glue quantity according to PLC automatic control, and the whole can be moved. Glue groove stainless steel, Adjust the glue quantity automatically according to the speed. |
| 6 | Trolley | 1 | Roll change time 5 to 10 minutes. |
| 7 | Preheater (paper core) | 1 | MH-900T-2200.Diameter of pre-heater roll:￠900mm,electricadjust the preheating area, water valve for the Shanghai brand, with safety protection cover |
| 8 | Bridge conveyor | 1 | ST- bridge. One sets of paper pulling parts, electric deviation correction. According to the speed adjustment of single machine, keep synchronization. |
| 9 | Double pre-heater | 1 | MH-900T-2200.Diameter of pre-heater roll:￠900mm,adjust the electric preheating area, water valve for the Shanghai brand, with safety protection cover |
| 10 | Gluing machine | 1 | GA-318D type of 318mm, variable frequency motor, display quantity of cement, the main bearings imported products. |
| 11 | Double facer | 1 | DF-745 type, Large worm gear box, automatic deviation correction, frequency conversion motor, wallboard for casting, drive roller hanging glue, 600mm * 18 block heating plate, hydraulic lifting. heating plate plated chrome. Pre-paint . |
| 12 | Main drive | 1 | Diameter 745mm Rubber roller Independent reducer box, gimbal driving. |
| 13 | NC slitter | 1 | SS-300N, For a single time less than 8 seconds, 5 knife 8 line, zero line |
| 14 | NC cutter | 1 | NC-200N, Paper length is 9999mm. The computer can store multiple
orders, the man-machine interface is separated, the display shows
production information, and the computer controls the automatic
change list without stopping the machine. Paper cutting accuracy +
1mm. Cutter shaft of 228mm spiral knife in Taiwan. Color mark recognition system |
| 16 | Stacker | 1 | CF-200C Small gantry stacker |
| 18 | Electric system | 1 | Adopt OMRON Schneider and other European brands. Including wires from switch board to main motor. |
| 19 | Steam system | 1 | pipes above valves provided by customers. |
| Optional equipment | Splicer | 5 | SP-03-2200 type. |
| Automatic Tension-corrected Machine | 1 | FTR-300,Precision±3mm.Test method:by Full-width infrared electric eyes. | |
