1. Designed according to high request and for reliable
function,the operation of the machine ishumanized,which can
accomplish the setting,revision,implement,replacing and memory
function in a short time with a exact dare displayed.
2. ALL the driving rollers adopt the high quality steel with
hard chromium plated and the surface is polished.
3. The driving gears adopt 20CrMntin high quality alloy steel
which is heat treated and polished.
4. Lubricate oil automatic balance device can keep the oil
level equal in each unit.
5. The machine is controlled by PLC with the function of “Automatic zero return”,and memory function of printing location and carton size.
6. Lead edge feeding.(kick feeding is optional)
7. The customer can choose steel anilox roller or ceramic
anilox roller,the lines of the anilox roller can also be chosen
according to customer’s requirement.
Function of Feeding Department:
1. Adopt sun feeder,Wind absorbing auxiliary paperboard
feeding,can make the cardboard feed favoringly.The volume of the
wind can be adjusted accord the camber of the paperboard.
2. Start protecting device of the main motor,when the
machine-platform not been locked,the main motor can not running
3. Continuous and skip cardboard feeding,counting device is
4. Double rubber rollers for feeding,the rubber roller have
slot for prevent the overlarge
5. The feeding roller is rubber with cylinder cushioning
device,precise feeding,will not destroy the hardness of the
cardboard when the feeding space is small
6. The side baffles adopt electrical control with data
display.(here can add automatic pneumatic aligning device),the back
baffle box adopt electrical adjustment,the front baffles space is
synchronous manual adjustment
7. Brush dust-removal equipment with dust-absorption
blower.Can adjust the wind volume accord the cardboard size.
8. Each unit is electric moving left and right with warning
bell,make sure the operator safe
9. Electronic counter be used for setup the production
quantity,when complete the production quantity,automatic warning(if
chose the touch screen control,the touch screen will display the
Function of printing Department:
1. The printing roller adopt without gap roller,surface is
treated by lapping finish,after balance correct and hard chrome
plating,smooth in operation.
2. Quickly change printing plate device,foot switch for
electric control the printing roller’s clockwise and anticlockwise running.
3. The feed roller,press roller,rubber roller and aniox roller
space adjustment all adopt self-locking structure.
4. The phase of the printing roller adopt PLC and electric 360°adjust,accord the error to input the adjust data,can be adjusted
while the machine running or stop.
5. The horizontal direction moving of the printing roller
adopt PLC and electric adjustment,accord the error to input the
adjust data the adjust scope is ±10mm.
6. The phase fix device adopt cylinder brake,when the unit is
opened and washing,the cylinder brake all the units rolling running
and keep the original location of the gears.
7. The automatic Pneumatic control Up and down device of the
anilox roller is synchronous with the cardboard feeding
system.(when the cardboard is fed,the aniox roller of each printing
unit will automatic orderly go down when stop feeding,the anilox
roller will automatic orderly go up.)
8. Pneumatic membrane pump inking,automatic circle,water
9. With”clean printing plate memory”unction,after washing the printing plate,the printing plate,the
printing roller will running back to the original printing
Function of Slotting Department:
1. With pre-creasing wheels for prevent the cardboard rupture
2. Single roller with double knives slotting,the height of the
carton adopt PLC and electric input data adjustment.(PLC with touch
screen adjustment as an option)
3. The phase of the slotting unit adopt PLC and electric 360°adjust,accord the error to the adjust data,can be adjusted while
the machine running or stop.(PLC with touch screen adjustment as an
4. The slotting knives and the creasing wheels horizontal
moving adopt electric synchronous adjustment.(PLC with touch screen
adjustment as an option,input the size of the carton into the touch
screen,will automatic adjusting).
5. Creasing space and knife roller space adjustment adopt
6. The carton height adjustment have a anticollision device
for the slotting knives,will not destroy the machine.
7. An anticollision device is used while the slotting knife
plate horizontal moving(Electronic formula)
8. The slotting knives is sawtooth,adopt alloy steel material
and after heat treatment and grinded,more hardwearing and
sharp-edged.Two-piece type cutting knives,sharp-edged and high
9. The hole and handle tool as an option.
Function of Die Cutting Department:
1. The rubber roller adopt mechanical control the position
move left and right.The movement distance is 40mm.
2. The phase of the die-cutting unit adopt PLC and electric
360°adjust,accord the error to input the adjust data, can be adjusted
while the machine running or stop.(PLC with touch screen adjustment
as an option)
3. The horizontal moving of the die roller adopt PLC and
electric adjustment,input the adjust data accord the
error,adjusting distance 10mm.(PLC with touch screen adjustment as
4. The space adjustment between rubber roller and die roller
adopt self-locking structure,with cylinder big scope quickly
adjust,decrease the rubber wear,increase the rubber life.
5. The space adjustment between the feed rollers adopt
6. The unique speed compensation device can make the rubber
roller rolling running with the die roller,make the surface speed
of the rubber cushion is completely controlled by the die
roller,the shape of the carton sheet will absolutely equal to the
7. There is a rubber repair device with the machine,the rubber
can be used after be repaired.
Economic printing speed
Max.size of paperboard
Min.size of paperboard
Min.space of slotting
Max.depth of slot
Skip feed size
Thickness of standard printing plate