|
[China]
Trade Verify
Address: #526, Block E, Building 5, Software Industry Base, Nanshan District, Shenzhen , China, 518061
Contact name:Sandra
Shenzhen Coolmay Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
16 Analog Input Coolmay HMI PLC CORTEX A8 CPU Programming Port
16 Analog Input 8 Analog Output HMI PLC All In One Upport Programming Port Protocol / BD Board Protocol
Coolmay HMI/PLC all-in-one machine has innovatively realized the high integration of HMI and PLC switch, analog and temperature in hardware. It can be used in various occasions requiring PLC control without external PLC and other expansion modules. The highly integrated industrial automation control solution uses pluggable terminals, which greatly facilitates the disassembly, installation and maintenance of terminal customers. It can be replaced directly when it fails, achieving "zero travel expenses" and free on-site maintenance.
Parameter:
| Display | Dimension | 275*194*36mm |
| Resolution | 1024*600 pixels | |
| Type | 10.1” TFT | |
| Features | Support interrupt, linear arc interpolation, PID auto-tuning. 32K program capacity, 32K retentive register | |
| Memory | RAM | 128MB |
| ROM | 128MB | |
| CPU | CORTEX A8 720MHz-1GHz | |
| I/O | DI/DO | 12DI/12DO |
Transistor output: Low level NPN, COM connect to negative; Relay output: Normally open dry contact | ||
| DO type and load | Relay (MR) or transistor (MT, Y0-Y3 are MOS) or mixed (MRT) MOS tube: 2A/point, 4A/4 points COM; MT: 0.5A/point, 0.8A/4 points COM, 1.6A/8 points COM; MR: 2A/point, 4A/4 points COM, 5A/12 points COM. | |
| Analog I/O | 16AI/8AO | |
| AI type (optional) | Type E/E_/K/K_/S/S_/T/T_/J/J_ thermocouple/ PT100/ PT1000/ NTC10K/ NTC50K/ NTC100K/ 0~10V/ 0~5V/ -5V~5V/ -10V~10V/ 0~20mA/ 4~20mA/ mixed | |
| AO type (optional) | 0~10V /0~5V/ 0~20mA/ 4~20mA/ mixed/ -5~5V/ -10~10V (2DA for 1 minus voltage) | |
| High-speed function | High-speed counting | 6 channels single-phase 60KHz, or 2 channels AB (Z) phase 60KHz + 1 channel AB phase 10KHz |
| High-speed pulse | 8 channels,Y0-Y3 is 100KHz, Y4-Y7 is 10KHz. High-speed counting + high-speed pulse < 480KHz | |
| Connection | HMI | 1 HMI download port,1 USB 2.0 port |
1 RS485 or 1RS232 port Ethernet port (can not coexist with PLC Ethernet port) | ||
| PLC | 1 Mini type B USB port, 1 RS232 port (Program port,also can be used as COM port) | |
| 1 RS485 or 2 RS485 COM ports (one is changed from the default RS232 port), CAN (2.0A/B), Ethernet port (can not coexist with HMI Ethernet port), WIFI (will occupy the default RS232) | ||
| Software | HMI | CoolMayHMI HMI programming software |
| PLC | Compatible with GX Developer8.86 and GX WORKS 2 |
Advantage:
◆ Upper computer programming software compatible with Works 2/GX Developer8.86 (supports Ladder diagram and SFC language, does not support structured programming/labels).
◆ Powerful, compatible with FX3G/FX3U/FX3S PLC, high processing speed.
◆ Military level 32 bit CPU adopted, which is faster and more adapted to industrial environment of high electromagnetic interference.
◆ Special encryption, prevent illegal reading thoroughly. 8-bit encryption, 12345678 as password can thoroughly prevent reading of ladder logic program.
◆ Clock supported, rechargeable battery adopted.
◆ Default With 1 HMI Downloading port, 2 PLC programming ports: one MiniB USB port with faster downloading speed; one Rs232 programming port with 8 mouse hole sockets, and 1 USB port.
◆ Support programming port protocol/Modbus protocol/Rs protocol/BD board protocol,
PLC communication with each other and other devices is easily achieved.
◆ Convenient for wiring, adopting 3.81mm pluggable terminals.
◆ Flexible, can be customized accordingly.
◆ Easy installation. DIN-Rail (35mm width) installation and fixed hole installation.Flexible, can be customized accordingly.
◆ 32K steps program capacity, 32k registers of hold on when power off, support interrupt,linear&circular interpolation,PID and self-tuning,high powerful.
◆ PLC Software is compatible to Mitsubishi, HMI use Coolmay programming software.
Introduction of each interface and indicator:
POWER: Power indicator, connected to the power light
RUN: PLC running status indicator. This light is on when the PLC is running.
COM: touch screen and PLC communication status indicator, when the two communicate, the light is on
Power terminal: The positive and negative terminals of the DC24V switching power supply are respectively connected to the DC24V and 0V of the power supply terminal.
PLC programming port: two PLC programming ports (MiniB type usb port / RS232), PLC program can be downloaded through 232 programming line or USB cable download
Touch screen programming port: download touch screen configuration program
USB interface: mainly can be directly inserted into the U disk of the file system FAT 32, can also be inserted into the mouse.
