Home Companies Shenzhen Coolmay Technology Co., Ltd.

220v 1 Phase Servo Motor Speed Controller 1hp AC Motor Drive Controller

Shenzhen Coolmay Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: #526, Block E, Building 5, Software Industry Base, Nanshan District, Shenzhen , China, 518061

Contact name:Sandra

Inquir Now

Shenzhen Coolmay Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

220v 1 Phase Servo Motor Speed Controller 1hp AC Motor Drive Controller

Country/Region china
City & Province shenzhen
Categories Solar Chargers
InquireNow

Product Details

220v 1 Phase Servo Speed Motor Drive Controller 1hp Phase Ac Motor

 

Introduction to product features

Built in motion control function,

Support I/O control and standard Modbus RTU protocol

In some cases, it supports the replacement of PLC or pulse module.

 
1 The pulse module supports 5V and 24V independent connection, and the built-in 24V power supply effectively reduces signal interference.
 
2 Support 17 bit single turn absolute vaLue encoder;

3 Equipped with a new generation of servo motor, it can cover the power range of 50w-3000w;
 

4 Direct control via switch
Minimalist motion control scheme
Ultra low cost design
Cyclic control of point motion

 

5 Controlled by i/o module of PLC
PLC pulse output module required
Reduce users' system design cost
Simpler control and easy operation

 

 

Parameter:

 

Wiring diagram of position control mode
1. The internal +24v power supply voltage range is 20v~28v, and the maximum working current is 100mA.
If an external 24V power supply is used, please connect the external power supply +24v to pin 16 (COM),
and the external power supply 0V to pin 43 (e0v).
 
2. The user of do output power supply needs to provide it by himself. The recommended
working powersupply voltage is DC24V, and the conduction voltage drop of do port is about 2.4V.
Please pay attention to it in application.The maximum allowable voltage of do port is DC30V
and the maximum allowable current is 50mA.

Hot Products

3.5inch HMI Control Panel DC24V Smart home Control RS485 Modbus RTU Human Machine Interface TFT LCD ...
HMI Control Panel 320*240 Pixels Resistive 32bit CPU 408MHz Supports All Fonts In Windows Features: ...
HMI Control Panel 88*88*25mm Dimension 4-Wire Resistive 42mA/24V Consumption Features: 1. Resistive ...
HMI Control Panel Communication Protocols 4-Wire Resistive Panel RS485 Interface TK series HMI ...
HMI Control Panel MView Software 32bit CPU 408MHz 4-Wire Resistive Panel TK series HMI applied ...
4-wire resistive HMI Control Panel Support MODBUS mView HMI programming software Syntax Check: Click ...