|
[China]
Trade Verify
Address: #526, Block E, Building 5, Software Industry Base, Nanshan District, Shenzhen , China, 518061
Contact name:Sandra
Shenzhen Coolmay Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Coolmay Modbus programmable controller hmi 60K colors resistive touch screen 275*194*36mm RS232 RS485 COM port
HMI PLC all-in-one solution is to integrate the controller, operation interface, input/output, analog input/output, high-speed counting/pulse and communication port into a compact unit to meet the needs of customer equipment automation control.
BIG size in 10 inch, 1024x600 pixels.
Intefrated with plc controllers.
Compact and flexible , beautiful design, space/cost saving.
PRODUCT DESCRIPTION of HMI PLC ALL IN ONE
Feature:
The features are as below.
1. Super functions.PLC compatible with FX3G/FX3U/FX3S PLC.It
operate fast.
2. Highly integration.The digital points are 30 inputs and 30 outputs at most.The digital output can be transistor,relay or mixed output.Analog can reach up to 16 input and 8output.It has 2PLCCOM
port(Rs232and USB Port).1 downloading port on HMI.
3. Support several high-speed counting and high-speed pulse.Acceleration and deceleration are independent.The total high-speed
counting and pulse can not exceed 480KHz.
4. 32K steps program capacity.32K power-off retentive registers.support interrupt.linear and circular interpolation.PID
self-adjusting.
5. Special encrvotion.Set password as 12345678 to thorouahly
prevent readina data PLC only supporls 8-bit password encryotion.
6. PLC is compatible with programming software GX Developer8.86Q and GX Works2 and HMl is mView software.
7. The network module can be selected accordina to customer
reauirements to realize remote control More models are supported to
customize if bulk order.
| Model | QM3G-100FH |
| Dimension | 275*194*36mm |
| Cutout size | 262*180mm |
| Input | 24VDC |
| Power Consumption | 6-8W |
| HMI | |
| Feature | 60K colors resistive touch screen, supports portrait display |
| Type | 10.1"TFT |
| Display size | 222*125mm |
| Resolution(pixels) | 1024*600 |
| RAM | 64MB (Please inquire if requires storing historical data) |
| ROM | NOR Flash 16MB |
| CPU | 32bit CPU 408MHz |
| COM ports | Type-B HMI download port (can download PLC program through the USB penetrating function), RS232 |
| Software | Coolmay TPWorks HMI Programming Software |
| PLC | |
| I/O level | - Input: Passive NPN, public terminal isolated - Transistor output: Low level NPN, COM connect to negative - Relay output: Normally open dry contact |
| DO type and load | - MT: 2A/point, 4A/4 points COM; MT: 0.5A/point, 0.8A/4 points COM, 1.6A/8 points COM - MR: 2A/point, 4A/4 points COM, 5A/12 points COM. |
| High-speed counting | Single phase 6 channel 60KHz, or 2 AB 60KHz + 1 AB 10KHz, or 2 ABZ 60KHz + 1 AB phase 10KHz |
High-speed pulse (Only for MT models) | 8 channels, Y0-Y3 is 100KHz, Y4-Y7 is 10KHz. High-speed counting + high-speed pulse < 480KHz |
| COM port | 1x mini USB, 1x RS232, 1x RS485 |
| Software | Compatible with GX Developer8.86 and GX WORKS 2 |
| Detailed info. refer to: “Coolmay QM3G-FH All-in-One User Manual”, “Coolmay CX3G/FX3GC PLC Programming Manual”, “Coolmay TP HMI User Manual” | |
