|
[China]
Trade Verify
Address: No. 328 on the 4th plant hengyong Road, Jiading District, Shanghai
Contact name:Amy lu
Shanghai KUB Refrigeration Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
General
WK series temperature controller is a pressure responsed
temperature controller.Our company have
KP61,KP68,KP69,KP71,KP73,KP75,KP77,KP79,KP81,KP98...instock.This
series temperature controller products are widely used for the
commercial refrigerator ,refrigerated warehouse ,refrigerated
cabinet , icecream machines etc.
Installation
1. The sensing bulb of the temperature controller should be
installed at the temperature controlled point with good air
ventilaton for correct temperature sense .Please noted that the
sensing bulb should be installed on the air return area other than
the registered area of the refrigerated warehouse.
2. The capillary tube between the sending bulb and the controller
should not pass through the region with lower temperature than the
controlled point, and should avoid to contact other pipes.
3. During installation ,the bending radius of the capillary tube
should not be less than 60mm.and the capillary tube should be
clamped with straps every 300mm.
4. By turning the button of main adjusting screw and differential
adjusting screw(before turning the locating washer should be turned
off),the temperature and differential temperature can be set
according to the values indicated on the scale.
