HEBEI QINYI CONVEYING EQUIPMENT CO.,LTD |
|
CEMA Standard Carrying Return Conveyor Steel Roller for Coal Mining
1. Strong hardness and high wear resistance;
2. Good Sealing Performance - the carrying roller is fully sealed, and both ends are equipped with labyrinth seals, oil and grease will not leak, which can make the roller runs under a fully sealing state;
3. Long Service Life - the carrying roller can reduce belt wear, keep the belt run in its track, and extends the belt life;
4. Low Operating Cost - carrying rollers can reduce the overall cost of belt conveyors and reduce maintenance man-hours.
Characteristics for Transport Roller
1. Flat/Carrier/Carrying Rollers: Used to handle bulk&unit
material.
2. Impact Rollers: Installed at the loading point to absorb the
shocks and to help protect against belt damage.
3. Return Rollers: Used to sustain and support the belt during its
return section and performs a cleaning action
--- Return rollers with Spaced Rings (Rubber Disc Rollers)
--- Return Rollers with Helical Rubber Rings (Spiral Rollers)
4. Self-aligning/Training Rollers: Used to adjust the belt
deviation, preventing hunting and ensuring stable operation of
conveyor belt.
--- Tapered self-aligning rollers
--- Friction self-aligning rollers
Product name | Belt Conveyor roller |
Lift time | 50000 hours |
Production capacity | As usual 600 pieces/day |
Diameter & Length | Dia: 76-219mm, Len: 190-3500mm |
Tube | Q235 carbon steel |
Shaft | 45# Cold drawing round steel, Dia: 20mm, 30mm , 35mm, 40mm |
Bearing | Single and double row deep groove ball bearing 2RZ and 2Z with C3
clearance |
Bearing No. | 6204, 6205, 6305, 6306, 6307, 6308, 6309, 6310 |
Seals | Grease retaining inner seal with multi-stage labyrinth and
retention cap with outboard rubbing flinger seal |
Welding | Mixed gas shielded arc welding end |
Finish | Painting/rubber/steel screw/galvanized |
Standard | ISO/BS/JIS/DIN/CEMA/Australia |
Material feature | Water, wear, dust and corrosion resistance |
Certifications | ISO9001/BV/SGS |
Application | Harbor & port, coal, mining, quarry, power industry, cement
plant etc |
The role of the idler is to support the weight of the conveyor belt
and the material. After the type and model of the tapered idler and
friction idler are determined, the combined structure design of the
rolling tapered idler and friction idler is required to be
accurate. The normal operation of the tapered roller and friction
roller. The combined structure design of tapered roller and
friction roller includes
The role of the roller is to reduce the friction between the
conveyor belt and the roller, which accounts for more than 25% of
the total cost of the conveyor and plays a key role in the life of
the conveyor belt. Although the roller is a small part in the belt
conveyor, the structure is not complicated, but it is not easy to
make a good quality roller. The trough roller set is an important
part of the belt conveyor, with many types and large quantities. It
accounts for 35% of the total cost of a belt conveyor and bears
more than 70% of the resistance. Therefore, the quality of the
roller is particularly important. The radial runout of the roller
affects the belt conveyor. Within the range of runout specified in
our country, the belt conveyor can be kept running smoothly,
otherwise it will cause the belt conveyor belt to resonate and
jump, causing material toss and polluting the environment. The
higher the belt speed, the more it appears that the radial runout
is small.
1. Lubrication and sealing of tapered rollers and friction rollers
2. Coordination of tapered roller, friction roller and related
parts;
3. Shafting support end structure
4. Improve the rigidity of the tapered roller and friction roller
system.