Active Member
|
[China]
Address: No. 30 Hongkong Middle Road, Qingdao City, China
Contact name:Jack Liu
HEBEI QINYI CONVEYING EQUIPMENT CO.,LTD |
|
|
OEM Steel Belt Self Aligning Conveyor Roller DTII Energy Saving
Conveyor Carrier Taper Self-Aligning Idler Conical Roller
The characteristics of the Self Aligning tapered roller: the tapered tube body is formed by high-frequency welded pipes and seamless steel pipes. The wall thickness of the tube body is uniform and the outer circumference of the tube meets the design requirements, without the need for finishing the outer surface and other processes. The outer diameter jumps are all less than 0.5mm. Conical self-aligning idler, self-aligning, high sensitivity, large cone angle, no wear, energy saving and consumption reduction.
The working principle of the Self Aligning tapered roller: When the
tape is deflected to any side, the upper beam of the roller group
rotates under the action of the sliding friction between the tape
and the small end of the tapered roller, and the tape is sent
straight to make the tape normal Move in the center.
The tapered roller is widely used in various transportation
industries such as steel mills, power plants, docks, coal mines,
etc. It has, anti-impact, anti-aging, no noise, self-lubricating
and non-tearing conveyor belt, reducing resistance and suitable for
long-distance transportation. Energy consumption.
Main Features of Conveyor Self-Aligning Roller
When the position of the belt is changed from its center line on
the same plane, the self aligning idlers can correct this
condition.
There are three types of self aligning idler: blocking idler,
friction idler and taper self aligning idler.
There are used both carrier and return section.
Layout 1 set per 10 sets at carrier section.
Layout 1 set per 6-10 sets at return section.
| Product | Conveyor Roller |
| Material | Q235 for Pipe, #45 for Shaft. |
| Diameter | 60-219mm(60,76,89,102,108,114,127133,159,178,219,etc). |
| Length | 100-3500mm. |
| Sealing | Lithium Soap Type Grease, Grease Retaining Ineer Seal With Muti-stage Labyrinth and Retention Cap With Outborad Flinger Seal. |
| Bearing | Single & Double Row Deep Groove Ball Bearing 2RZ&2Z with C3 Clearance. |
| Standard | GB,DIN,ISO,CEMA,JIS. |
| Welding | Mixed gas shielded arc welding end. |
| Painting | Ordinary Painting, Hot Galvanized Painting, Electric Static Spraying Painting, Baked Painting. |
| Application | Mining, Port, Cement, Steel, Metallurgy, Electric Power, Coal, Machinery and Other Industries. |
| Model Number | DTII, TD75 |
| Certificate | ISO9001:2008 |
| Standard | GB,DIN,ISO,CEMA,JIS,ETC |
| Diameter | 89-159mm |
| Length | 200-530mm |
| Pipe Material | Carbon steel/Q235 |
| Shaft Material | Steel drawn shaft |
| Bearing Brand | SKF,NSK,,HRB,LYC,ZWZ,C&U |
| Bearing Type | Deep groove ball bearing |
| Bearing Model | 4G204,4G205,4G305,4G306,4G308 |
| Bearing House | 2.5/3mm Metal Stamping |
| Sealing | Labyrinth seal, nylon 6 material |
| Grease | Lithium grease lubricant |
| Painting | Electrostatic spraying painting |
| Color | Customized |
Product Details:
1. Standard: GB/AS/CEMA/JIS/DIN.
2. Lift time: 30000-50000hours
3. Output: 500000 pcs/ year.
4. Warranty: One year.
5. Roller Diameter: 60-219mm.
6. Roller Length: 150- 3500mm.
7. Roller Pipe: Q235 carbon steel, with good state-of roundness and
straightness,and the pipe will be machined before welding with the
bearing house to ensure well-balanced rotation.
8. Shaft: Q235 or #45, made of cold-drawn bright round steel.
9. Bearing: Ball bearing C3 , HRB,SKF,NSK
10. Seals: Labyrinth seals, have a good water proof and dustproof.
11. Welding: Mixed gas shielded arc welding end.
12. Color: According to your requirement.
13. Surface: Powder coated /galvanized.
