Double Labyrinth Q235 Conveyor Belt Idlers With 3 Carrier Roller

Double Labyrinth Q235 Conveyor Belt Idlers With 3 Carrier Roller

Q235 Steel Hanging Conveyor Roller Garland Idler For Underground Coal Mine

Garland rollers do not only permit to be used instead of conveyor roller stations at the upper trough (upper belt section) but also at the lower trough (lower belt section) to support the returning of the belt. In a multi-sectional way, these conveyor rollers offer various linking combinations and suspensions and are often found with great belt widths.

Upper garland idlers usually have 3 rolls.

They can move either in a transverse direction or in the transport direction. Transverse mobility allows them to adapt to irregular loads. Mobility in the handling direction allows a reduction in knocks between large pieces of the material handled and the rollers supporting the belt.

Return garland idlers usually consist of 2 rolls positioned in a V shape to facilitate belt guide.

Garland idlers with 5 rollers can be mounted in the load points.

The 5 roll garland idler has a greater mobility allowing it to adapt to any form of handled material, thus absorbing shocks due to the impact of materials of large lump size.

If 5 roll garland idlers are used, rubber tread rollers are usually no longer needed for loading points.

belt conveyor impact idler each part introduction 

1. Manufactured by steel pipe especially for high precision roller, compared with ordinary steel pipe, the diameter and wall thickness tolerance,bending degree,ovality is very little which can make the roller have minimum radial play eccentricity,strong load,low shaking and less noise

2. High precision and brightness cold drawn shaft with 1045 material

3. Rollers are fitted with deep groove 2RS and 2Z bearing with C3 and C4 internal clearance with HRB,SKF,NSK,TNT,FAG brands.

4. Bearing Housing formed by punching many times which can assure high precision. The wall thickness is 1-2mm thicker than DIN standard which can increase 40% stability and roller’s carrying capacity. It can make the roller not deformed even working under overload environment and increase roller’s lifetime.

5. TK contact multiple labyrinth seals made of nylon,ABS have great advantage in water and dust resistance

6. Rubber Rings: Abrasion Resistant, Shock Absorbing,The size and hardness can be customized as per client's requirements.

Gauge lattice parameters

(1) Core material: NN100, NN150, NN200, NN250, EP100, EP150, EP200, EP250, EP300, etc
(2) Bandwidth: 100mm-3000mm
(3) Cloth layer: 1-10 layers
(4) Cover glue: working face: 0-10mm non-working face: 0-6m

Different type of conveyor idlers:

1. Flat/Carrier/Carrying Rollers: Used to handle bulk&unit material.
2. Impact Rollers: Installed at the loading point to absorb the shocks and to help protect against belt damage.
3. Return Rollers: Used to sustain and support the belt during its return section and performs a cleaning action
--- Return rollers with Spaced Rings (Rubber Disc Rollers)
--- Return Rollers with Helical Rubber Rings (Spiral Rollers)
4. Self-aligning/Training Rollers: Used to adjust the belt deviation, preventing hunting and ensuring stable operation of conveyor belt.
--- Tapered self-aligning rollers
--- Friction self-aligning rollers