8-30mm copper rod upward continuous casting machine for copper rod make

8-30mm copper rod upward continuous casting machine for copper rod make

A typical horizontal continuous casting unit for copper tubes consists of a mains frequency cored melting-holding combined furnace with metal flowing under surface, a crystallizer, a cooling water distribution system, a servo control withdrawal system, an in-line synchronous saw, a saw for mold changing, a hydraulic system and an electric control system, etc.
A typical mains frequency furnace adopts a new combination structure of melting-casting with metal flowing under surface. The inductor adopts a vertical structure with silicon sheets imported. As the molten metal flows from the melting furnace to the holding furnace under the surface, the heat emission (that would be otherwise caused) is avoided so as to reduce the energy consumption. Meantime, the metal loss is also reduced. As the exposure of the molten metal to the air is substantially reduced, the product quality can be stabilized and enhanced. The parameters of the melting-holding furnace like voltage, amperage, effective power and compensation factor are indicated with signals. The metal temperature in the furnace is continuously measured and displayed. Also indicated are the temperatures and pressures for the water for cooling the inductor coils, wrapping sleeves and cables with necessary optic and acoustic alarms equipped.

The flow chart

PRODUCTS PICTURES:

The Copper rod horizontal Continuous Casting Machine is a melting and holding furnace with a cooler, together with graphite die and cooler assembly and run out track with withdrawal machine and cut-off device. Molten copper flows from the crucible into the graphite casting die which is cooled with the help of a highly efficient cooling jacket. Water-cooled graphite dies are attached horizontally to the holding crucible. During the continuous casting operation copper flows into the graphite casting die where it solidifies. The solidified strands are intermittently withdrawn by the withdrawal equipment.

WUXI EAST CHINA FURNACE CO.,LTD

Warm regards,

Joey Wong

No.3 Bashi Furong Industrial Park,Xishan District,Wuxi City,Jiangsu Province,China

Tel: +86 510 83788308
Fax: +86 510 83786308
Mob: +86 139 2112 5611
Wechat: 86 139 2112 5611
Whatsapp: 86 139 2112 5611
email:Joey@wxhddl.cn
Joe.777@outlook.com