Home Companies Wuxi Huadong Industrial Electrical Furnace Co.,Ltd.

Oxygen Free Copper Rod 8mm Upward Continuous Casting Machine 8.9 kg/dm Fand Density

Contact Us

[China]

Trade Verify

Address: No.3 Bashi Furong Industrial Park,Xishan District,Wuxi City,Jiangsu Province,China

Contact name:Sun

Wuxi Huadong Industrial Electrical Furnace Co.,Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Oxygen Free Copper Rod 8mm Upward Continuous Casting Machine 8.9 kg/dm Fand Density

Country/Region china
City & Province wuxi jiangsu
Categories Spring Steel

Product Details

 

Oxygen Free Copper Rod 8mm Upward Continuous Casting Machine 8.9 kg/dm Fand Density​

 


AN OXYGEN FREE COPPER ROD Φ8mm CONTINUOUS CASTING PRODUCTION LINE 


COMPOSITION OF EQUIPMENT 
Single furnace, continuous casting machine, guild wheel frame, wire frame, double bar coiling machine, water cooling system, temperature measurement system and control system.


 MAIN TECHNICAL PARAMETERS OF THE EQUIPMENT 
1, there is a core frequency induction furnace
(1) production of T2 copper rod (raw material electrolytic copper, bright wire)
(2) furnace body structure
(3) electric furnace power 45KW
(4) electric furnace voltage 380V
(5) the frequency of electric furnace 50HZ
(6) the melting rate of less than 150kg
(7) electric furnace capacity 500kg
2, continuous casting machine
(1) the number of cast rod 2
(2) cast rod diameter specification 8mm; head number 2
(3) drive AC servo drive
(4) servo motor power 1.3KW
(5) the tracking accuracy of the liquid level is + 2mm
3, double bar coiling machine
(1) automatic take-up rod
(2) to close the line into a circle around the weight of 300kg


PRODUCT TECHNICAL STANDARDS 
1, density: 8.9kg/dm fand


DELIVERY OF TECHNICAL DOCUMENTS AND DRAWINGS 
1.The Seller shall provide the following documents and drawings within 15 days after the contract is signed and effective.
a.    Equipment layout plan
b.   The basic condition of equipment and civil engineering
c.    Water and electricity layout
d.    The operation platform.
2. The Seller shall provide the following documents and drawings when the equipment is delivered.
a.    Process document and operation specification of continuous casting machine
b.    The general equipment and consumables drawings.
c.    Detail table of equipment wearing parts
d.    The electrical principle diagram and system diagram.
e.    The installation of electrical cable material list.


  SELLER'S SCOPE OF RESPONSIBILITY 

1. The Seller shall be responsible for the installation and commissioning of the contract equipment and the delivery of the relevant provisions of the annex.
2, according to the contract requirements to submit the relevant technical documents.
3. Responsible for the installation, commissioning and training of contract equipment.
4, equipped with special tools for the use of the installation.
5, technical services: customer service guaranteed for one year, life-long maintenance (except coil, water jacket, melting ditch).
6, follow-up technical support: equipment upgrades and assist to build the furnace, etc..
7, service response time: the buyer informed within 48 hours.
8, responsible for equipment acceptance and timely handling of the relevant transfer procedures.


BUYER'S SCOPE OF RESPONSIBILITY
1, production workshop: span, length, height of crane lifting equipment installation, all shall comply with the requirements.
2, circulating cooling water.
3, power supply.
4, compressed air.
5, test for production of raw materials and auxiliary (charcoal, graphite flake etc.)
6, the seller is responsible for the provision of equipment in the installation process of staff and board.


MAIN EQUIPMENT CONFIGURATION AND SUPPLY RANGE 
 

 Device nameQuantityRemark
1Power frequency induction furnace with core(45KW)Two body furnace1 setFurnace body, furnace body bracke
Sensor1 setIron core, coil, water jacket, channel 1
Furnace cover1 set 
Oven building material1 set

Quartz sand, insulating material, refractory brick

2Furnace electric controlFurnace electrical control1 setOne Electric cabinet ,one control cabinet 
Furnace temperature detection1 setDisplay cabinet with temperature
3Temperature measurement systemWater inlet diversion device1 setValve, pressure gauge, etc
Mould temperature detecting assembly1 set 
Water temperature total1 set 
4Continuous casting machineTop lead continuous casting machine frame1 set 
AC servo motor and speed reducer1 set 
Guide wheel2 set 
Ttraction drive system1 set 
Mould hanging device1 set 
Water cooling circulating device for mould1 set 
5Electric control cabinetDrive1 set 
Man-machine interface1 set 
PLC controller1 set 
Lifting system1 set 
Liquid level tracking system1 set 
6

Mould assembly

Copper rod mould2 set 
Quick connector4 set 
Protection sleeve10 setTen Containing graphite mould
7Double bar coiling machineCable car1 set 
Receiving tray2 set 




 MAIN SUPPORTING DEVICE BRANDS AND MANUFACTURERS 

 Device nameBrands and manufacturers
1AC servo motorJapan Yaskawa
2High precision reducerNAIF
3Servo driverJapan Yaskawa
4PLC controllerJapan Yaskawa
5Man machine interfaceWEINVIEW
6Electrical original deviceSchneider
7Motor and speed reducer equipped with wire winding machineShanghai Saini transmission Co.
8ThermocoupleShanghai Bao Lian
9Oven building materialHenanGongyi 
10Graphite modelShandong Laixi De River

 

 

Wuxi East China Furnace Co.,Ltd

No.3 Bashi Furong Industrial Park,Xishan District,Wuxi City,Jiangsu Province,China
Contact person: Joey.Wong
Tel: +86 510 83788308
Fax: +86 510 83786308
Mob: +86 139 2112 5611
Wechat: 86 139 2112 5611

Whatsapp: 86 139 2112 5611

joey@wxhddl.cn

Hot Products

450×16mm Copper Strip Single Strand Continuous Casting Machine with Melting Furnace SPECIFICATIONS 1...
Copper or Brass tube D50mm Horizontal Continuous Casting Machine with Smelting furnace Specification...
Horizontal Continuous Casting Machine for Brass Rod D50mm Specifications: 1. Types of casting ...
Brass Bar D160mm Single Strand Continuous Casting Machine Horizontal Type Ⅰ. Specifications: 1. ...
Brass Bar D20-150mm Horizontal Copper Continuous Casting Machine with 80-300KW Smelting furnace ...
Copper Continuous Casting Machine with melting furnace and holding furnace price Specifications: 1. ...