|
[China]
Trade Verify
Address: 1F, Building 1, No. 569, Fanfeng Road, Xukou Town, Wuzhong District, Suzhou, Jiangsu Province, China
Contact name:Beryl Pu
Suzhou Belove Biotechnology Co., Ltd |
|
Verified Suppliers
|
|
|
Size classification
According to their size, they are divided into 1.5mL, 2mL, 5mL, 10mL, 15mL, 50mL, etc. In addition, centrifuge tubes have round and pointed bottoms, as well as screw caps and insert caps. The screw cap centrifuge tubes have a finer scale, while the insert cap tubes have only an overall volume label.
Materials
There are plastic centrifuge tubes and glass centrifuge tubes commonly used in laboratories, generally plastic tubes are used more often because glass centrifuge tubes cannot be used in high speed or ultracentrifuge. Plastic centrifuge tubes are made of PP (polypropylene), which has a relatively good performance. Plastic centrifuge tubes are transparent or translucent, so you can visually see the sample centrifugation, but they are more easily deformed and less resistant to the corrosion of organic solvents, so their service life is shorter.
Smaller centrifuge tubes, also known as EP (eppendorf) tubes, are used with microcentrifuges for the separation and centrifugation of micro reagents.
Details are shown in the table
| Item No. | Chinese Name | Relative centrifugal force | Sterilization method | Packaging method |
| BA102-N-N | 1.5 ml Graduated microcentrifuge tube | 17800×g | Unsterilized PCR Ready-to-Use | 1000/pack, 10 packs/case |
| BA102-N-F | 1.5 ml Graduated microcentrifuge tube | 17800×g | EO/Irradiation PCR Ready-to-Use | 100/pack, 10 packs/case |
| BA103-N-N | 2.0ml Graduated microcentrifuge tubes | 17800×g | Unsterilized PCR Ready-to-Use | 1000/pack, 10 packs/case |
| BA103-N-F | 2.0ml Graduated microcentrifuge tubes | 17800×g | EO/Irradiation PCR Ready-to-Use | 100/pack, 10 packs/case |
| BA104-N-N | 5 ml centrifuge tube with flat cap and round bottom | 19300×g | Unsterilized PCR Ready-to-Use | 100/pack, 10 packs/case |
| BA104-N-F | 5 ml centrifuge tube with flat cap and round bottom | 19300×g | EO/Irradiation PCR Ready-to-Use | 100/pack, 10 packs/case |
| BA105-N-N | 10 ml centrifuge tube with flat cap and round bottom | 19300×g | Unsterilized PCR Ready-to-Use | 100/pack, 10 packs/case |
| BA105-N-F | 10 ml centrifuge tube with flat cap and round bottom | 19300×g | EO/Irradiation PCR Ready-to-Use | 100/pack, 10 packs/case |
| BA106-N-N | 15ml screw cap graduated centrifuge tube conical bottom | 9000×g | Unsterilized PCR Ready-to-Use | 100/pack, 10 packs/case |
| BA106-N-F | 15ml screw cap graduated centrifuge tube conical bottom | 9000×g | EO/Irradiation PCR Ready-to-Use | 50/rack, 10 racks/box |
| BA107-Y-N | 50ml screw cap graduated centrifuge tube conical bottom | 9000×g | Unsterilized PCR Ready-to-Use | 25/pack, 10 packs/case |
| BA107-Y-F | 50ml screw cap graduated centrifuge tube conical bottom | 9000×g | EO/Irradiation PCR Ready-to-Use | 25/pack, 10 packs/case |
Made of high purity medical PP material, conforming to USP VI grade;
Autoclavable, 120℃, 15psi/15min.
Clear and accurate product scale;
10mL-50mL with screw cap, 0.5mL-5mL with one-piece cap;
Class 100,000 purification workshop production, no DNA enzyme, no RNA enzyme, no heat source.
Chemical resistance
There are many factors that affect the chemical resistance of an experimental appliance, so the true chemical resistance also depends on the actual test conditions. Compounds can affect the strength, elasticity, surface properties, color, appearance and weight of plastic products. The basic modes of causing these changes are as follows:
(1) Compound disruption of polymer chains, resulting in the absence of physical properties, including oxidation; reaction of functional groups in and on the chain; and depolymerization.
(2) Physical changes, including softening and swelling of the plastic due to solvent uptake; solvent penetration through the plastic; and decomposition in the solvent.
(3) Stress cracking caused by internal and external stresses resulting from the reaction of "stress cracking agents".
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Q: Where is your factory located? How can I visit there?
A: Our factory is in Wuzhong District, Suzhou City, Jiangsu Province, and all our customers, both domestic and foreign, are warmly welcome to visit our factory
Q: Are you a factory or a trading company?
A: We are a large factory integrating R&D, production and sales.
Q: When can I get the price?
A: Normally, we quote within 24 hours after we receive your inquiry.
Q: Can you do OEM?
A: Yes, we do OEM, ODM and R&D. We can process products according to the different needs of our customers.
Q: What is the delivery time?
A: According to the order quantity, it needs to be negotiated.
Q:If I want to order a small quantity, can you do it?
A: If you need products that we have in stock, that would be great and you can choose goods that are in stock.We can put your order together with our other customers' orders for production. But this will require some waiting time.
Q:How will you track my order?
A:When the goods start production, we will take photos of the goods and send them to you, if you find any production,defects, please contact us to correct it. Throughout the production process, we will keep in touch with you via email or instantinformation and you can get the latest news about your order. After the goods are completed, we will take pictures of the goods and pack
to you before shipping.
Q: How can I get a sample?
A: Please pay the sample cost and courier fee before we receive your first order. We will return the sample cost to you on your first order.
Q: Can you brand the products with our brand?
A: Some products can. We can put your Logo on the products and packaging if you can meet our MOQ.
Q: Can you make products in our colors?
A: Yes, the color of the product can be customized if you can meet our MOQ.
Q: How do you guarantee the quality of your products?
A:
1) Strict testing during the production process.
2) Strict sampling inspection of products before shipment, and make sure the products are well packed.
