Xiamen Comwinning Imp.&Exp.Co.,Ltd |
Verified Suppliers
|
|
EU Regulation Rack & Pinion Construction Site Lift
Construction Material Lifting Hoist Introduction
1. All Production Line adopt special fixture, mould, gauge made by
us to ensure all detailed size.
2. Select high quality raw material from China Bao Steel Group,
other like motors ,reducers, gearbox, safety device with low noise,
electrics is schneider or Korea repute brand with reliable quality
3. Special design,compact and reasonable structure,easy to
installation and adjustment.
4. Each equipment should be test and make record in Factory, all
details will be adjust like motor brake, safety device operation,
all limit switch operation, dropping test, loading test, and mast
section erection test to ensure the completed equipment run well
when take into use.
Construction Material Lifting Hoist Features and Advantages
* The material hoist runs without vibration or trembling. The man
and material lift starts and stops without surging or jerking.
* The passenger and material elevator is reliable with very little
breakdown and is durable with very long work-life.
* Adopt energy-saving helical reducers made specially for rack and
pinion elevators, extremely reliable and durable.
* Racks centering at mast reduce partial load torque of builders
hoists, makes the construction hoists run more stably and smoothly.
* Applying non-eccentric rollers, make the installation of
construction site elevators be faster and easier, with much less
error.
* The integrated elevator car roof, which made by a steel plate
with edges fully welded, enhance hoist cage strength and ensure no
water leakage.
* Easy access to electrical panels of lift for maintenance
* Certified safety braking system of rack and pinion hoist.
* The material elevator car frame is enlarged and strengthened.
* The elevators are equipped with full set of safety facilities,
including centrifugal brake, limit switches, Electromechanical
interlocks.
Construction Material Lifting Hoist Technical Data
Item & Article No. | SC320(BZ) KP-B17, SC320/320(BZ) KP-B18 Man and Material Lift |
Payload capacity | 3,200 kg per cage with full load |
Lifting speed | 0–46 m/min. |
Max. lifting height | 450 m |
Cage width (internal) | 1.5 m |
Cage length (internal) | 3.2 m |
Cage height (internal) | 2.35 m |
Motor control | FC control |
Engine power | 3 x15 kw per cage |
Gearbox | Helical reducer |
Safety device type | centrifugal brake |
Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
Mast section | square column 650*650*1508 mm with bolted rack |
Rack module | 8 |