Xiamen Comwinning Imp.&Exp.Co.,Ltd |
Verified Suppliers
|
|
Q345B Steel Lifting Speed 0–46 M/Min Construction Site Elevator
Construction Site Elevator Application
We are special supplier of building hoist in China, our building hoist have been Widely exported to all over the world and won good reputation, whose payload capacity is as much as 2000kg, lifting speed can reach up to 96m/min, and the erection height reaches up to 450m., our products have been widely used for transportation for both men and cargo in field of general buildings, but also industry, electric power, mining well, oil, chemical industry etc.
Construction Site Elevator Production and Materials
KANGBO implements the true modular design of rack and pinion
hoists, standardization and fine finishing of lifts parts and spare
parts, and assembly line production. The material elevator
components are versatile and universal.
The construction material elevator structural parts are made of
16Mn and Q345 high strength steel.
The construction lift cage roof is made by a full steel plate, and
the edges are totally welded, to ensure no water leakage and high
strength.
Construction Site Elevator Features and Advantages
* The modular and standardizing system makes the Kangbo
construction elevators be flexible, efficient, safe, productive,
low energy consumptive and ownership cost, making them the best
choice for both construction and rental companies.
* The material hoist runs without vibration or trembling. The
Construction Site Elevator starts and stops without surging or
jerking.
* The passenger and elevator is reliable with very little breakdown
and is durable with very long work-life.
Construction Site Elevator Technical Data
Item & Article No. | SC200BZ, MP-B07; SC200/200BZ, MP-B08 Construction Site Elevator |
Payload Capacity | 2,000 KG per Cage |
Lifting Speed | 0–46 m/min. |
Max. Lifting Height | 450 m |
Cage Size (internal) | 3.2(Length)*1.5(Width)*2.35(Height) Meter per Cage |
Cage Doors | 3 Doors, Entry Door + Exit Door + Side Door |
Motor Control | FC (Frequency Control) |
Engine Power | 2x15 KW per Cage |
Gearbox | Helical Gearbox |
Safety Device Type | Centrifugal Brake |
Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
Type of Mast | Square Column 650*650 mm with Bolted Rack |
Length Mast Section | 1.508 m |
Rack Module | 8 |