Xiamen Comwinning Imp.&Exp.Co.,Ltd |
Verified Suppliers
|
|
Rack and pinion hoist construction lift SC320(BZ) KP-B17 SC320/320(BZ) KP-B18
Design
It is the truly modular rack and pinion hoist design, so the
elevator drive devices and cars are generic and interchangeable.
Multiple choice of construction lifts car doors or ramps is
available.
The modular and standardizing system makes the Kangbo construction
elevators be flexible, efficient, safe, productive, low energy
consumptive and ownership cost, making them the best choice for
both construction and rental companies.
Production and Materials
KANGBO implements the true modular design of rack and pinion
hoists, standardization and fine finishing of lifts parts and spare
parts, and assembly line production. The material elevator
components are versatile and universal.
The construction material elevator structural parts are made of
16Mn and Q355B high strength steel.
The construction lift cage roof is made by a full steel plate, and the edges are totally welded, to ensure no water leakage and high strength.
Technical Data
Item & Article No. | SC320(BZ) KP-B17, SC320/320(BZ) KP-B18 |
Payload capacity | 3,200 kg per cage |
Lifting speed | 0–46 m/min. |
Max. lifting height | 450 m |
Cage width (internal) | 1.5 m |
Cage length (internal) | 3.2 m |
Cage height (internal) | 2.35 m |
Motor control | FC control |
Engine power | 3x15 kw per cage |
Gearbox | Helical reducer |
Safety device type | centrifugal brake |
Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
Mast section | square column 650*650*1508 mm with bolted rack |
Rack module | 8 |