Active Member
|
[China]
Address: No. 5, Gangxia South Street, Dongguan City, Dongguan City, Guangdong Province, China
Contact name:Wei
GuanYao Precision Mould Co., Ltd |
|
|
Auto Connector Mold Parts With Fine Surface grinding , EDM
Machining Services
Special Features
Product Name:Plastic Precision Molding Parts
OEM ODM: Yes
Cavity: Single Cavity/ Multi Cavity
Runner:Hot Runner/Cold Runner
Main Machining: EDM, Grinding, CNC, Wire Cutting
Tolerance:0.005mm
Size:Customer's Requirements
Precision:0.001-0.002mm
Hardness: 58HRC
Press size: 50T to 300T
Molding Type: Herizontal and Vertical type
Quality Tseting: All Items Inspect Before Shipping
Surface Finish: Depends On Your Requirements
Advantage: Fast Delivery
Service Type: Grinding, Milling, Wire EDM,Other Machining Services
Tolerance: As Your Drawings Request
Material Capabilities: Fully Make Sure To Meet Your Needs
1. Product Application:
These connector mold parts were fabricated for molded pin connector
and were designed for use in a high volume electronics application.
It required precision as well as durability, and required features
that would enhance the manufacturability of the finished parts.
They are designed to allow for frequent change overs during
production, while maintaining a high degree of precision.
2. Processing Equipment:
Parts are manufactured utilizing our precision surface grinding,
and EDM machines which include Mitsubishi EDM, Sodick EDM, and
Charmille EDM.
3. Testing Instruments:
CMM, Nikon Projector, Mitutoyo Digital Caliper, Mitutoyo Digital
Height Gauge, Rockwell Hardness Inspection Instrument, etc
Connector Mold Parts Introduction
| Business Service | OEM accepted |
| Processing Equipment | CNC milling machines, wire cutting machines, surface grinding machines, EDM machines, and more. |
| Application | Auto mold |
| Measuring& testing | Height Gauge, Hardness tester, dimensional detector, projector, micrometer and so on. |
| Machining Basis | Primary cusromer's drawings, 2D or 3D is ok |
| Surface Treatment | according to our customers’ requirements |
| Tolerance | Accuracy of grinding: 0.001 mm; Accuracy of EDM: 0.002 mm; Accuracy of Wire-cutting: 0.002mm; Accuracy of CNC: 0.002mm In short, the requirment of tolerance as customer's demand. |
| OEM ODM Service | Yes |
| Quality Assurance | 1. Incoming material control to make sure all the raw materials are
qualified. 2. Operators follow the daily check list to check the machines to make sure they are in good conditions, and follow the spec to make products. 3. Use qualified operators and correct parameters to make sure good quality. 4. According to the quality assurance procedure to check the quality. 5. Full quality check after product before shipping. |
Equipment List
| Equipment | Model No. | Brand | Quantity | Accuracy | In total |
| Projector | V-12B | Nikon | 4 | ±0.001mm | 9 sets |
| High Definition Tool Microscope | MM-400 | Nikon | 3 | ±0.001mm | |
| Height Gauge | MF-501 | Nikon | 6 | ±0.001mm | |
| Hardness Tester | HR-150A | Rockwell | 1 | ±1° | |
| Wire EDM | M50B | Seibu | 2 | ±0.002mm | 4 sets |
| AQ400L | Sodick | 2 | ±0.002mm | ||
| Grinding | SGM450 | ShuGuang | 16 | ±0.001mm | 16 sets |
| Discharging | AD30Ls | Sodick | 8 | ±0.005mm | 10 sets |
| EA8A | Mitsubishi | 2 | ±0.005mm | ||
| Milling machine | Acmam | 3 | ±0.05mm | 3 sets | |
| CNC Processing Center | D14MA | Fanuc | 1 | ±0.001mm | 3 sets |
| Carver4006 | JingDiao | 2 | ±0.002mm |
Main Business
1. Nonstandard Circular Component
Discharge angle: 0.02
Discharge tolerance: 0.005mm
Grinding angle: 0.01
Grinding tolerance: 0.001mm
Hardness: 58HRC
2. Precise Tungsten Steel Mold Parts
Discharge angle: 0.02
Discharge tolerance: 0.005mm
Grinding angle: 0.01
Grinding tolerance: 0.001mm
Hardness: 58HRC
3. Precise Plastic Mold Parts
Discharge angle: 0.02
Discharge tolerance: 0.005mm
Grinding angle: 0.01
Grinding tolerance: 0.001mm
Hardness: 58HRC
4. Precise Stamping Die parts
Discharge angle: 0.02
Discharge tolerance: 0.005mm
Grinding angle: 0.01
Grinding tolerance: 0.001mm
Hardness: 58HRC
5. Completed Precise Plastic Molds
Press size:
From 20T to 300T
Including Herizontal and Vertical type.
6. Molding for special engineering resin
Press size: From 50T to 220T
Including Herizontal and Vertical type.
Company History
2000: Founded in ShenZhen China beginning with Normal tools fabrication major business with local customers.
2006: Set up office in HK.
2010: Gained the ISO 9001 Certificate and has built up a strategic cooperation relation with over sea customers.
2013: Established precision factory in Dongguan for making high precision tools and components.
2016: Expanding overseas markets and becoming approved vendor for customers in Europe, USA.
2019 April: Move in to the new plant cover 11000m2 With YLS Group cooperation for one–stop service molding and stamping.
