|
[China]
Trade Verify
Address: Addr:101 B-33, Xinhe community, Fuhai Street,Bao'An District, Shenzhen, China
Contact name:Cindy
Shenzhen Ulinkcon Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
M25 Model 3 Power 50A 3 Data 5A Multi Pin Connectors Waterproof , Wire To Board 6 Pin Male Female Connector
Main Features
Quick Details of Multic pin connector waterproof
This model connectors is specialized for various power signal comblined applications, easy ooperation design in push locking system, just need a second to insert, then it will lock automatically.
Power & Singal together in one set design is getting more and more popular to many device, which solve the power and signal connector separated using perfectly, especially for the space limited application.
Cable assembly work for Multi pin Connectors is supported in Ulinkcon,just please share cable request in details, custom service available.
Application industries
| Electrical Parameters | |
| Number of Poles | 3+3pin wire to board connector |
| Current Rating | 30A/40A +5A |
| Voltage Rating | 300VAC max |
| Durability Voltage | 2500VAC @ 60 s. |
| Technical Parameters | |
| Contact Resistance | 10 mΩ max |
| Insulation Structure | 500 MΩ at 500VDC |
| Operating Temperature | -40°C ~ +105°C |
| IP Class | IP67 (1m / 30min) |
| Mold Material | PA66 |
| Contact/Terminal Material | Gold Plated Brass |
| Seal Material | Silicone |
| Operation Parameters | |
| Voltage Rating | 600VAC max |
| Current Rating | 50A max |
| Min Wire Size OD | 6.5mm ~ 10mm |
| Max Wire Size OD | 10.5mm ~ 18mm |
| Max.Cable Cross Section Area | 0.5mm2 ~ 6.0mm2 |
Product Configuration
Product Dimension
FAQ
Q1:What is rated voltage?
A1:Rated voltage also known as operating voltage, which mainly depend on the connector insulation material used, the spacing between the size of contact. Some of the components or devices in less than its rated voltage may not be completed to its functions.
Q2:What is rated Current?
A2: Rated current, also known as operating current. With the rated voltage, as in the case below the rated current, air plug in general can work properly. Plug in the aviation design process, through the thermal design of the connector to meet the requirements of the rated current, because in contact with on a current flow out of date, due to conductor resistance and contact resistance, contact on will be heat. When the heat exceeds a certain limit, the plug will damage the insulation and the formation of air exposure on the surface of the coating to soften, resulting in failure.
Q3:How to choose the suitable connector?
A3: You need to do as followings:
* Confirm Current Rating and Number of Contacts
* Confirm Assembly style need to pre-cable or not. If needed,then
confirm the next.
* Confirm Cable guage
* Confirm Cable Length and Material.
