Characteristics of machine tools:
Based on manual surface grinder, it covert the longitudinal and
vertical machine to fully automatic The bidirectional friction
electronic clutch, simple and reliable structure, clutch reversing
process has no impact, no noise, safe commutation 5000000 times;
the electric control part with electronic switching frequency
switching, The service life 10 times longer than the relay control,
simple operation, sensitive, infinitely variable; large output
torque, low noise, Safe and reliable. Power supply use a
number of mechanical and electrical protection function which is
safe voltage, Energy saving, power saving, power consumption per
class (calculated according to 8 hours) is only 0.6.When the manual
grinding is working,Before and after the workbench's movement, in
and out, around the reversing are automatic operation, greatly
improving the production's efficiency and the surface finish,
suitable scope that from the original single, small batch to
mass batch.
Model | MDS1022 |
Bench | Max.workpiece to be Ground
(L×W×H)
(×) | mm | 540×250 |
Maximum travel of table (L ×
W)
(×) | mm | 560×260 |
Table maximum cutting area (L ×
W)
(×) | mm | 540×250 |
Number of T -Slot T (×) | mm | 1×14 |
The grinding head | Distance From Table Surface To
Spindle Center | m | 450 |
Wheel
Size(dia×width×bore)
(WA46K5V) (××) | mm | ø200×20×ø31.75 |
Spindle speeds (50HZ) | r/m | 2850 |
The amount of
feed | Table longitudinal (left and right) speed
(stepless)
()() | /min | 3--20 |
Table horizontal (before and after) the amount of
feed
() | Continuous (variable
speed)
() | m/min | 150 |
Intermittent
(stepless)
() | m/ | 0-5 |
The handwheel rotates | mm | 2.5 |
Hand wheel each grid | mm | 0.02 |
Vertical (up and down) feed wheel
feed
() | The handwheel rotates | mm | 1.25 |
Hand wheel each grid | mm | 0.01 |
Reversing feeder | The total input power | W | 150 |
X- feeder output speed. X- | /min | 0--225 |
X- feeder size X- | m | 280×130×120 |
Y- feeder output speed. Y- | /min | 0--120 |
Y- feeder size M Y- | m | 280×130×120 |
Motor
power | Spindle motor | kw | 1.5 |
Cooling motor | kw | 0.4 |
Working precision | The machined surface of the base of
parallelism | m | 300/0.005 |
Surface Roughness | μm | Ra0.32 |
Weight of machine | Net | kg | 880 |
Cross | kg | 980 |
Packing Size (L×W×H) (××) | m | 1780×1240×1980 |