|
[China]
Trade Verify
Address: Juyuan Industry Field No.20, Mapo Town, Shunyi District, Beijing, P.R. of China, 101300
Contact name:Britney Yuan
Beijing Zulin Formwork & Scaffolding Co., Ltd. |
|
Verified Suppliers
|
|
|
Electro Galvanized Cup Lock Scaffolding with high loads carrying capacity
Descrition:
Cuplock Scaffold System
Material: Q235 steel
Surface: HDG, Electro Galvanized, Powder Coated, Painted
Tube OD: 48.3mm
Cuplock Scaffold Standard
· - Easy to STAND - say no to nuts and bolts or wedges
· Cuplock systems- Versatile!
· Cuplock systems- Timely tested and Proven design with safety accessories
· Quick fastening of horizontals.
· Quick/Fast/Solid erection and dismantling results in time and labour saving.
· Widely and Versatile use in construction, demolition or maintenance projects for any type
of structure i.e. straight or curved.
· Lightweight but high loads carrying capacity.
· Low maintenance.
Cuplock Standard
Cuplock spigotted standards are manufactured from 48.3mm O.D. tube. They have cup joints
at 500mm intervals. The captive mobile top cups are designed to endure rough site handling and
welded bottom cups are made from high-quality steel. Integral spigots are provided at the top of
each standard for making vertical connections. The spigots and the base of each standard incorporate
11/16mm dia. holes to enable use of locking pins to join standards where necessary.
Items |
|
|
1Cuplock standard 0.5 Meter 1'-7-11/16'' w/s.spigot |
|
|
2Cuplock standard 1.0 Meter 3'-3'' w/s.spigot |
|
|
3Cuplock standard 1.5 Meter 4'-11'' w/s.spigot |
|
|
4Cuplock standard 2.0 Meter 6'-6'' w/s.spigot |
|
|
5Cuplock standard 2.5 Meter 8'-2'' w/s.spigot |
|
|
6Cuplock standard 3.0 Meter 9'-10'' w/s.spigot |
|
|
Cuplock ledger
The Ledgers are manufactured from 48.3mm O.D. tube with forged steel blade ends which locate into
bottom cups of the standards and are locked in place by the corresponding top cups. Ledgers are available
in various lengths to provide the desired grid dimension for scaffolding or formwork.
Items |
|
|
1Cuplock ledger 0.6 Meter 1'-10-1/4'' |
|
|
2Cuplock ledger 0.9 Meter 2'-11-7/16'' |
|
|
3Cuplock ledger 1.0 Meter 3'-6'' |
|
|
4Cuplock ledger 1.25 Meter 4'-1-1/4'' |
|
|
5Cuplock ledger 1.5 Meter 4'-11-13/16'' |
|
|
6Cuplock ledger 1.8 Meter 5'-10-7/8'' |
|
|
7Cuplock ledger 2.0 Meter 7' |
|
|
8Cuplock ledger 2.5 Meter 8'-2-7/16'' |
|
|
Transoms are fabricated from twin structural angles fixed back to back with a drop forged blade
attached to each end. The 1.8m and above Transom has an additional web member welded below the
flange section for added strength. The transom blade locates into a bottom cup and is locked in position
by the top cup. The outward standing bottom leg of the angles supports the steel planks in a captive
manner. Available in various lengths to suit scaffolding and formwork applications.
Cuplock Diagonal Brace
For diagonal brace, a range of longitudinal braces made with swivel forged blades at either ends
to be fitted into cups of Cuplock standards are available.
Items | Dimensions |
|
1Cuplock diagonal brace 2.4 Meter | 1.8x1.5m |
|
2Cuplock diagonal brace 2.7 Meter | 1.8x2.0m |
|
3Cuplock diagonal brace 3.0 Meter | 2.5x1.5m |
|
4Cuplock diagonal brace 3.2 Meter | 3.0x2.0m |
|
Plank
Galvanized steel scaffolding planks and battens are lightweight non-slip working surface, which can be
used with omega transoms.
HOP-UP 1/2/3 Bracket
Hop-up Brackets are designed in omega sections as well as in tubes sections for placing battens with
provision of forged blades to be fitted with Cuplock standards by cup joint. Omega Hop-up brackets are
available for single board, two board and 3 board allocations.
HOP-UP 1/2/3 Bracket in tubes sections
We can also supply brackets in omega sections.
Jack base and accessories
specification model is complete. The quality is good, the
price is moderate.
