Home Companies CHANGZHOU PIONEER TEXTILE TECHNOLOGY LTD

Concrete Mat Cloth in Green color for Ditch lining

Active Member

Contact Us

[China]

Address: NO.198,YUNHE ROAD,ZHONGLOU DISTRICT,CHANGZHOU CITY,JIANGSU PROVINCE,CHINA.

Contact name:Stefan Jiao

CHANGZHOU PIONEER TEXTILE TECHNOLOGY LTD

Concrete Mat Cloth in Green color for Ditch lining

Country/Region	china
City & Province	changzhou jiangsu

Product Details

Concrete mat cloth GCCM-8mm permanent erosion control for slope protection

Specification

Concrete Mat Cloth GCCM Physcial Properties
CMC	Thickness (mm)	Mass(unset) (kg/m2)	Density(unset) (kg/m3)	Density(set) (Kg/m3)	Roll Width (m)
CMC5	5	8	1500	20%	2.1
CMC8	8	11	1500	20%	2.1
CMC13	13	18	1500	20%	2.1
.
Pre-set CC Properties
Setting
Working time: 1-2 hours subject to ambient temperature.
CC will achieve 70-80% strength at 24 hours after hydration.

Method of hydration
Spray the fiber surface with water until it it feels wet to touch for several minutes
after spraying.

Re-spray the CC again after 1 hour if:
1.installing CC in a steep or vertical surface;
2.Installing in warm climates;

Notes:
1. CMC can not be over hydrated and an excess of water is always recommended;
2. Minimum ratio of water:CMC by weight: 1:4
3. Don't jet high pressure water directly onto the CMC as this may wash a channel in CMC.
4. Please use non-saline water for hydration.If CMC will be used for sea projects,please
advise us beforehand.
5. CMC can hydrate and set under water;
6. CMC has a working time of 1-6hours after hydration. Don't move or touch CMC
once it has begun to set.
7. Working time will be reduced in hot climate;
8. CMC will set hard in 2-3 hours,but will continue to gain strength for several months.

Set CC Properties

Strength: PioneerTex Concrete Mat Cloth has very high early strength

Item		Test Method		MARV
Compressive Strength		ASTMC109-02		35-40 Mpa
Bending Strength		BS EN12467:2004		3-6 Mpa
CBR Puncture Strength		EN ISO12236:2007		3.5KN

	Tensile Strength(KN/M)
	Length Direction		Width Diection
CMC5	25		20
CMC8	28		24
CMC13	32		28

Other
Item		Test Method		Value
Freeze-thaw resistance		BS EN12467:2004 Part5.5.2		pass
Soak Dry		BS EN12467:2004 Part5.5.5		pass
Water Impermeability		BS EN12467:2004 Part5.4.4		pass
Fire Retardant		16 CFR PART 1633		pass

Who are we?

PioneerTEX is the professional and leading manufacturer of Concrete Mat Cloth rolls in China.

We have the patent for Concrete Mat Cloth in China.

We developed Concrete Mat Cloth Since 2014, and we get the patent in 2017.

And the technolog for Concrete Mat Cloth is mature in 2016.

What is Concrete Mat Cloth (CMC) GCCM ?

CMC GCCM is a flexible and soft cement impregnated fabric, that hardens on hydration to form a thin,durable,water proof and fire retardant concrete layer. Essentially, it's concrete on a roll.

What's the structure of Concrete Mat Cloth GCCM?

CMC GCCM was made of woven geotextile, nonwoven geotextile, HDPE geomembrane, and 3D structure geocomposite fabric.

The specially formulated dry concrete powder mix will be reinforced by 3D mesh geo-fabric, and sandwiched between porous nonwoven geotextile and water proof HDPE geomembrane or Aluminium Foil composite.

How does the Concrete Mat Cloth CMC GCCM work?

CMC GCCM allows concrete construction without the need for plant or mixing equipment. It's very easy, and just add water on the CMC non-waterproof side.

Once Set, the 3D mesh fabric will reinforce the concrete, prevent crack propagation and provide a safe plastic failure mode. The woven and nonwoven geotextile on the top side will offer special protection on the CMC, and offer higher tensile strength for composite.

HDPE geomembrane backing on the bottom surface of CMC ensures the material is completely water proof.

How many types of Concrete Mat Cloth GCCM are we manufacturing?

CMC GCCM is available in 3 thickness:

CMC5,

CMC8

CMC13.

They are 5,8 and 13mm thick respectively.

The CMC will become hard after hydration as below: