Omega Tyre E10 Kaeser Alternative Air Compressor Coupling

Omega Tyre Coupling Element E10 Kaeser Air Compressor Coupling

For permanent couplings (couplings that are in-situ all the time, as opposed to clutches or non-permanent couplings), there are two main types of transfer elements, typically characterized as follows:

Elastic couplings (transfer elements are usually rubber or polyurethane compounds or derivatives).

• Reverse the soft
• Without lubrication
• Usually cheaper than metal couplings (for similar torque capabilities)
• Usually with field replaceable components or elastomers
• Series complete, can be used interchangeably

Metal coupling (transfer element is usually steel).

• Compared with elastic couplings, torsional stiffness is larger
• Provides optimal torque-diameter ratio with higher power density
• Most competitive offer (Torque capacity)
• Excellent temperature range (usually limited by oil seal material)
• Good chemical resistance
• A variety of materials to choose from (certain styles)
• Zero bounce is available

The choice of couplings should be considered

• Transmitted power (torque)
• Allows and accommodates a limited number of dislocations (angles and/or parallels)
• Easy to assemble, maintain and disassemble
• Allow a certain amount of moisture (if required)
• Allows or compensates for end float/axial motion/thermal expansion
• Keep the connection between the hub and shaft rigid
• Withstand/compensate for temperature fluctuation/heat increase
• Prevent overload of the drive machine
• Low inertia has the least impact on the driving system
• Provide good lubricant retention capacity if necessary

Factory wholesale rubber coupling E10 E20 E30 E40 E50 E60 E70 E80 for kaeser air compressor sullair air compressor.

Omega Tyre Coupling Element