CompAir Oil Filter 04425274 Outside Screw Compressor Oil Filter
Steps for changing oil filter:
- Discharge the old waste lubricating oil.Drain the waste oil from the screw air compressor oil cylinder,
prepare a container for the waste oil, and then open the oil bolt
to drain the waste oil.When discharging lubricating oil, try to let the lubricating oil
drip for a period of time, in order to ensure the waste lubricating
oil discharge clean.(There will be a lot of impurities in the use of lubricating oil.
If the oil is not discharged cleanly when replaced, it is easy to
block the oil circuit, resulting in poor oil supply and wear of
structural parts)
- Remove the oil filter element of the old screw air
compressor.Remove the old oil container under the filter and remove the old
air pressure oil filter element.Be careful not to let waste oil stain the inside of the machine.
- Install a new screw air compressor oil filter element.Check the oil outlet at the installation location and clean up the
dirt and residual waste oil.Before installation, put the sealing ring on the oil outlet
position first, and then slowly screw on the new air pressure oil
filter element. Do not screw the air pressure oil filter element
too tight. Generally, after tightening it by hand, then use a
wrench to turn 3/4 turns.Pay attention to the new air pressure oil filter element, do not
use the wrench too hard, otherwise it is easy to damage the inner
sealing ring of the filter element, resulting in poor sealing
effect, can not start filtering effect!
- inject new engine oil to engine oil filter tank.Finally, pour the new oil into the oil tank, using a funnel if
necessary to prevent pouring the oil outside the engine.After filling, check again for leaks under the engine.If there is no leak, check the oil gauge to see if the oil filter
is on the top line. We recommend that it be on the top line.In the course of daily work, we should also check the oil ruler
regularly, and replenish the oil in time when the oil is less than
offline.
04425274 Cross Reference |
---|
Compair | 04425274 | Ingersoll Rand | 35362235 |
Compair | 00432996 | Ingersoll Rand | 52183233 |
Compair | 00988701 | Ingersoll Rand | 92036219 |
Compair | 98262229 | Ingersoll Rand | 92888262 |
Compair | 9.82628E+12 | Ingersoll Rand | 93578367 |
Compair | 104561 | Ingersoll Rand | BN15368 |
Compair | 499074 | Ingersoll Rand | BN16013 |
Compair | 4425272 | Sullair | 953 |
Compair | 100002189 | Sullair | 5081916 |
Compair | 10002189 | Sullair | 68500953 |
Compair | 10195274 | FuSheng | 7118146930 |
Compair | 98262299 | FuSheng | 91107032 |
Compair | 988701 | Elgi | 10340390 |
Compair | 98870100 | Elgi | 10444570 |
Compair | A04221574 | Elgi | B004800610003 |
Compair | A04425274 | Elgi | B407701 |
Compair | H9826280400001 | WORTHINGTON | 6211473500 |
Features
1, Directly replace Original Parts, compatibility 100%.
2, Replacement time 4000 hours, filtration accuracy <15μm,
filtration efficiency >99%.
3, High-strength plastic casing, corrosion-resistant, high-pressure
resistant, rubber or fluorine-sealed, leak-proof oil.
4, High-quality glass fiber, cost-effective, reducing maintenance
costs.
5. Ensure To Meet Original Manufacturing Standard,Better filtration
& Better oil cleanliness.
Oil Filter