|
[China]
Trade Verify
Address: Room 305, Xinji Commercial Building #1, Xiajiao, Panyu District, Guangzhou, China
Contact name:Matt Zhang
Guangzhou IMO Catering equipments limited |
|
Verified Suppliers
|
|
|
Dishwasher catalog.pdf
Commercial Kitchen Equipments Channel-Type Dishwasher 200 Baskets/H
National Standard 304# Stainless Steel Material
Technical Parameters:
Dimensions: 1155*768*1752mm
Maximum amount of washing: 203 baskets/hour
Maximum washing height: 450mm
Maximum hourly water consumption: 684 liters
Each basket water: 3.37liters/basket
Excellent Washing And Two Spray Series:
a. Computer designed stainless steel wash arms,rinse and strong,
accurate angle, a wide range
b. Pre-spray and spray the secondary spray designed to make better
c. Celsius above 82℃ hot water spray,more thorough disinfection
d. Efficient washing speed 203 baskets/hour
e. Triple drivetrain designs,without any regional effects of stress
f. Particularly suitable for stainless steel ,melamine
tableware material
Truly Excellent Energy-saving:
1. Province Water: hourly water consumption is only 420 liters
2. Power saving: 10℃ water to just 36kw heating power , 50℃
water just 18kw heating power
3. Heaters equipped with automatic temperature control device
4. Automatically shut down to save energy
5. The high quality insulation material so that the heater
insulation better.
Electricity and spray heater configuration:
| Model | EL-200B |
| Total Power | 46kw |
| Temperature of water | 10-50℃ |
| Cleaning heater power | 7.5kw |
| Spray heater power | 36kw |
| Others | 2.5kw |
Washing Capacity Reference:
| Model | 6’’Plate | 10’’Plate | 18’’Plate | 4.5’’Plate | Cup | Knife/Fork | Chopsticks |
| El-200B | 5481 | 3654 | 1827 | 3248 | 7308 | 24360 | 48720 |
Installation Requires Connection:
Power: 380V/50Hz/3p (three-phase five –wire system), cable: ≥GB25m
m²; Steam Connection: steam pressure: 0.5~3.5Bar; steam consumption:
70kg/h; Gas connection: water pressure ≥0.15Mpa; Gas Consumption:
5~5.5 m³/h; gas generaror tank 68kg, external tank
120kg; Inlet diameter: 6(ft); drain diameter 2(in); Water
pressure: 1.055kg/cm² ~ 1.76kg/cm²; preferably 1.4kg/cm²; you need
to intall pressure over 1.76kg/cm², valve(with other
companies); Water temperature:10°C or 5°C, according to
the configuration of the heater; water hardness:
0.034~0.103g/L; For information about installing an exhaust
hood (other companies), displacement: inlet end -5.7 m3/min, outlet end -11.3m3/min.
Model Display:
