|
[China]
Trade Verify
Address: 1515 Lizheng Road, Shuyuan Town, Pudong New Area, Shanghai China
Contact name:Howard
Shanghai Jindun special vehicle Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
Competitive Double Cabin Six Seats 213 KW Foam Fire Truck with 6000L Water & 2000L Foam Tanker
The foam fire truck is refited from the Chassis produced by SinoTRK Jinan Truck Co., LTD in China. The whole layout is reasonable . Equipment compartment, liquid tank and pump room are adopt split structure with novel and coordinated appearance. China brand fire pump is installed on rear of the vehicle and fire monitor on roof. The compact structure makes easy operation and maintenance.
The vehicle carries 8000L fire extinguishant and with fast speed. It's mainly used in petrochemical enterprises, oil terminals, oil fields, airports, and full-time fire brigades in large and medium-sized cities and enterprises.
Vehicle
| Dimension (L×W×H) | About 8475×2500×3400 (mm) |
| Gross Vehicle weight | 19800 (kg) |
| Curb Weight | 11600 (kg) |
| Max. power | 213Kw/290HP |
| Cabin | 2+4 seats, double cabin |
Chassis
| Manufacturer | Sinotruk HOWO |
| Model | ZZ5207N4617E1 |
| Drive type | 4x2 |
| Wheelbase | 4600mm |
| Max. speed | 100km/h |
| Min. turning diameter | ≤20m |
| Approach angle | 16° |
| Departure angle | 14° |
| Engine type | Pressure combustion, In-line six-cylinder, water cooling, inter-cooling, direct injection diesel engine |
| Model | WD615.87 |
| Max. torque | 1160N.M |
| Emission standard | Euro II |
| Clutch | pull type diaphragm |
| Gearbox | Manual, 10 forward gear |
Fire pump
| Model | CB10/60 normal pressure pump |
| Pressure/ Flow | 1.0MPa/3600Liters/min |
| Max. vacuum degree | ≥85 kPa |
| Priming time | ≤50s |
| Suction depth | 7m |
| Foam Proportioner | PH48, manual |
| Mixing ratio: | 3%, 6% |
Fire minotor
| Model | PL48 manual water/foam fire monitor |
| Position | At the top of vehicle |
| Flow | 1.0Mpa/ flow rate: 2880L/M |
| Range | Foam range:≥55m, water range:≥60m (1.0Mpa) |
| Rotation angle | Level≥360° Max. elevation angle≥+45° Max. depression angle≥-7° |
Liquid Tank
| Capacity | Water: 6000 Liters, Foam:2000 Liters |
| Material | High Quality Stainless Steel 304 |
| Structure | Total side girder structure |
Device
| 2 manholes 2 overflow devices 2 liquid level sensors 2 drain outlet with valves 4 filling pipe ends |
| Technical requirements | Conform to rule GA39.4-92 |
FAQ:
1. Q:Are you a factory or a trade company?
A: Shanghai Jindun Special Vehicle equipment Co., LTD is one of the biggest factories for special vehicles in China.
2. Q:Where is your factory located?
A:We are located in Shanghai Province,China.
3. Q:What's your payment method?
A: T/T and L/C are preferred.
4.Q:Do you arrange shipment for the vehicles?
A:Yes, we can arrange shippment based on trade terms.
5. Q: How is the packing?
A:All the packing comply with exporting standard.
Any other questions, please do not hesitate to contact with us.
