8.1A Rated Current Greenhouse Heat Pump Energy Efficient Automatic Start

YSR-160C Greenhouse Heat Pump Three-Phase 380V 3N~/50HZ Cooling Capacity 16.5KW

Water source heating and cooling machine product introduction:

Each water source air-cooling dual-purpose air conditioner is equipped with a standard imported Dajin five-compressor with a rated power of 3.75 kW, including the power of the blower motor, which is about four kilowatts, and about four kilowatt hours per hour under full load operation. Remote control touch automatic intelligent temperature control system, set the required temperature, start and stop automatically, one day heating, cooling down the working day, the average is about two degrees per hour, energy efficient, green and environmentally friendly, low operating costs, Long life and other advantages.

Comparison of greenhouse greenhouses with traditional electric air conditioners

Product Specifications:

Water source heating and cooling dual-purpose air conditioning machine:

With the continuous development of science and technology, the types of air conditioners have gradually become more and more diverse, and one of the more widely used types of air conditioners is the water source heat pump central air conditioner, which is a type of air conditioner that is very energy-saving and environmentally friendly.

The principle of water source heating and cooling dual-purpose air conditioner:

In the summer cooling, the water source heating and cooling dual-purpose air conditioner integrated machine well water is the heat source of the unit. The refrigerant absorbs heat and evaporates in the evaporator, and prepares 7°C cold water, which is sent to the room for use. Since the water body temperature is lower than the ambient air temperature, the condensation temperature of the refrigeration is lowered, so that the cooling effect is better than that of the air-cooled type and the cooling tower type. The efficiency of the unit is increased; the refrigerant is compressed by the compressor into superheated steam of high temperature and high pressure, and enters the condenser, which removes heat from the well water and discharges it into the well.

In the winter heating, the water source heating and cooling dual-purpose air conditioner integrated machine well water is the heat source of the unit. The refrigerant absorbs the heat of the well water in the evaporator and evaporates. The well water is recharged into the well. Since the temperature of the water body is higher than the ambient air temperature, the evaporation temperature of the heat pump cycle is increased, and the energy efficiency ratio is also improved. The refrigerant is then compressed by the compressor into high temperature and high pressure superheated steam, enters the condenser, and heats the circulating water to prepare hot water at 45 ° C to 50 ° C (up to 65 ° C).

Advantages of industrial water source heating and cooling machine:

Good stability: the temperature of geothermal energy or shallow surface geothermal resources is relatively stable throughout the year, and it is kept within the suitable range of 15-18 °C for many years. The temperature in winter is higher than the ambient air temperature, and the temperature in summer is lower than the ambient air temperature. The relatively constant temperature of the ground energy makes the ground energy air conditioner not affected by the external climate, the unit operation is more reliable and stable, and there is no problem of insufficient heating of the ordinary air conditioner or even heating.

Energy-saving and efficient: The water source heating and cooling dual-purpose air conditioner is mainly based on constant energy in the underground, supplemented by electricity, energy-saving and efficient. In the winter operation, the water source heating and cooling dual-purpose air conditioner integrated machine has a power conversion rate of 100%. In order to maintain normal operation, the conventional central air conditioner needs to use nearly 40% of the electric energy for defrosting, and only 60% of the electric energy is normally converted into heat. This makes the water source heating and cooling dual-purpose air conditioner integrated machine energy-saving 40%-50% than the traditional central air-conditioning. In addition to energy saving than traditional air conditioners, the water source heating and cooling dual-purpose air conditioner is about 50% more energy efficient than boiler heating, and about 60% more energy efficient than electric heating. The water source heating and cooling dual-purpose air conditioner integrated machine system is very reliable and durable. It has very few mechanical moving parts. All the components are not buried in the ground and are installed indoors. Generally, the outdoor underground heat exchange part has a life of 50 years, and the ground heat pump unit life is 25 years. The water source heating and cooling dual-purpose air conditioner integrated system is installed indoors, without wind, sun, rain, no frequent cleaning, and the service life is twice as high as that of ordinary air conditioners with only 10 years. The water source heating and cooling dual-purpose air conditioner is suitable for greenhouse vegetable and flower planting, animal husbandry and aquaculture, hotels, shopping malls, villas, large workshops, automobile 4S shops, schools and other buildings, villas for heating.

Environmentally friendly and recyclable: The operation of the water source heating and cooling dual-purpose air conditioner does not have any pollution, no burning, no smoke, no waste, no need to stack fuel waste, no urban heat island effect, and very friendly to the environment. Moreover, the water source heating and cooling dual-purpose air conditioner is a renewable resource, which is in line with the trend of sustainable energy development and is an ideal green product.

The water source heating and cooling dual-purpose air conditioner is a low-temperature low-level thermal energy resource formed by utilizing solar energy and geothermal energy absorbed by shallow water sources such as groundwater, rivers and lakes on the surface of the earth, and adopts the principle of heat pump to achieve low level through a small amount of high-level electric energy input. A technique for transferring thermal energy to high-level thermal energy.

The water source heating and cooling machine solves the drawbacks of the traditional geothermal air conditioner, which can only be used for summer cooling, not for winter heating and cooling moisture. At the same time, it solves the problem that the ordinary household electric air conditioner uses large amount of electricity during the winter, and can only use the electric auxiliary when the winter comes. Heating increases the amount of electricity used.

The water source heating and cooling machine makes full use of ground source heat and cold to become an air-conditioning energy-saving product. As long as you have ground water, it can be used for cooling and heating. Each standard five-water source air-cooling dual-purpose air conditioner is different according to the required temperature, and the cooling and heating area is 200-300. Around the square meter, the effect greatly exceeds that of electric air conditioners, which is more energy efficient and efficient than electric air conditioners.

Can be used for flower planting, animal husbandry, aquaculture, various seedlings, factory workshops, bathing hotel households, environmental heating and cooling equipment.

Advantages of the heating and cooling machine

As the name implies, the heating and cooling machine can meet the heating requirements in winter and meet the cooling requirements in the summer. But this is the work that ordinary air conditioners can do. Besides, what advantages does it have for us now?

1. Cost saving and low price;

2, energy saving: the average power consumption of the heating and cooling machine is lower than the traditional air conditioner;

3, low noise: low noise, high efficiency;

4, high efficiency: wind pressure is large, the wind is far away, and the cooling ability is extremely strong;

5, automatic: according to different customer needs settings, with automatic electronic control, automatic cleaning function, remote control device, etc.;

6. Environmental protection: The products are environmentally friendly, ventilated, ventilated, dustproof, deodorized and cooled. Increase air oxygen content and improve work efficiency;

7. Service: Installation: The installation of heating and cooling machine is convenient and simple.

At present, no matter what products, it is energy-saving and environmentally friendly, and the heating and cooling machine can achieve such requirements. At the same time, it can effectively reduce energy consumption and reduce operating costs, so it has been widely used in recent years.

The principle of the heat pump is exactly the same as that of the conventional air conditioner, but the design is changed. The heat exchanger is placed in a container filled with flowing ground water to completely isolate it from the air, which is equivalent to the conventional air conditioner operating at a constant temperature (16-18 ° C).

Summer cooling: from indoors (25-35 ° C) to absorb heat to (16-18 ° C of groundwater, because it is from high temperature to low temperature heat, so the efficiency is very high, energy efficiency ratio of up to 5-6.3, is the traditional air conditioning Doubled and saved 50%.

Winter heating: The heat is absorbed from the groundwater (16-18 °C) into the room, the energy efficiency ratio is up to 4.3, which is 2-4 times that of the traditional air conditioner, and is not affected by the ambient temperature, saving 50-70%.

Technical advantages:

First of all, the water source heat pump is a heating and air-conditioning system that uses solar energy resources stored in the earth's water body as a source of cold and heat to perform energy conversion. Among the water bodies that can be used, include groundwater or rivers, rivers and lakes in parts of the earth's surface, and the ocean. Surface soils and water bodies are not only a huge solar collector, but also collect 47% of the solar radiation energy, more than 500 times the energy used by humans every year, which makes it possible to use nearly unlimited solar energy or ground energy stored in it. . Therefore, water source heat pumps are a technology that uses clean renewable energy.

Then, the water body temperature of the water source heat pump unit can be 12 to 22 ° C in winter, and the water body temperature is higher than the ambient air temperature, so the evaporation temperature of the heat pump cycle is increased, and the energy efficiency ratio is also improved. In summer, the water body is 18-35 ° C, and the water body temperature is lower than the ambient air temperature, so the cooling condensation temperature is lowered, so that the cooling effect is better than the air-cooled type and the cooling tower type, and the unit efficiency is improved. The temperature of the water body is relatively stable throughout the year, and its fluctuation range is much smaller than the change of air. It is a good heat source of heat pump and air conditioner, and the temperature of the water body is relatively constant, which makes the heat pump unit run more reliable and stable, and also ensures the high efficiency and economy of the system. Difficulties in winter defrosting without air source heat pump

Finally, the water source heat pump uses electricity, which itself is a clean energy source, but consumes primary energy and causes pollutants and CO2 greenhouse gas emissions when generating electricity. Therefore, the pollution of the energy-saving equipment itself is small.