Piston Integrated Portable 30 Bar Air Compressor 15kW 20HP for
Laser Cutting Machine
The air compressor specially designed for medium-pressure laser
cutting is an integrated armored equipment developed by DEHAHA
compressor for the sheet metal and laser industries. The system is
equipped with 1~3m3/min@30bar/40bar compressed air, air tank 130L
-1000L (optional), stainless steel plate for freeze dryer, lower
pressure dew point, 5-stage precision filter, centralized
electronic sewage, thereby ensuring the cleanness of the cutting
gas source.
Model: DHH1230
Free air delivery: 1.2 m3/min
Working pressure: 30bar
Screw air end rotor lobe: 5:6
Control: PLC
Driven: belt
Cooling: by air
Electric motor: 20hp 15KW 380v/50hz/3ph IP54 grade
Discharge temperature: less than ambient +8 ℃
Noise: less than 65 dB(A)
Air outlet size: G3/4”
Dimension:1650*1500*1970mm
Weight: 1300kg
Warranty: 24 months for the screw air end,12 months for the whole
set compressor.
Model | | | | | | |
DHH1030 | | | | | | |
DHH1230 | | | | | | |
DHH1630 | | | | | | |
DHH2030 | | | | | | |
DHH2530 | | | | | | |
Advatages
1. Valve materials are made of Sweden stainless steel band.
2. In order to ensure that air compressor highly reliable, using a
redundant design principles, setting multiple protection measures:
unloading, down drain, exhaust, ensure that the zero-pressure
start.
3. Timed drain valve: Drainage and drainage at a time interval can
be adjusted. Ensure that the captain of an air compressor runs
comtinuously between regular drainage, effectively preventing water
too much liquid strike accidents.
4. Low exhaust temperature(10.0MPa exhaust air temperature ≤ 170
degrees, the temperature of exhaust air is above ambient
temperature of 15-20 ºC from after - cooler).
5. Fuel consumption per hour less than 0.143/KW.
6. High reliability and long maintenance period, very low fuel
consumption, low energy consumption and so on, greatly reducing the
overall general operating costs.