Dhh Compressor Jiangsu Co., Ltd |
Verified Suppliers
|
|
1,Germany Rotorcomp Air end
German technology, high efficiency, good cutting effect.
2. IE3 High efficiency motor
IP54/P55 high protection level
3,Manuli Italy Super Pipe
Anti-aging, Long service life.
High Polymer Material, High Intensity.
4,German original Mann filter
Air Filter, Purified Air from Very Beginning.
Oil Filter, Clean Oil Circulation.
Oil Separator, Purify Compressed Air.
150% Filtration by Serial Filter Paper Design
5. Low noise
All door panels are equipped with fireproof and thick sound-proof sponge.
Use thicker steel plates to make the shock-absorbing chassis.
6,The cold dryer and precision filter are equipped with an automatic drain valve to avoid manual draining.
Technical Parameters
Model | Air Delivery (m3/min) | Rated exhaust pressure (Mpa) | Power (kW) | Noise (Db) | Outlet diameter (In) | Dimension (mm) | Weight (Kg) | Exhaust pressure dew point (ºC) | Exhaust dust content (μm) | Exhaust oil content (ppm) | Gas storage tank capacity (L) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DBZY-10A | 0.55 | 1.58 | 7.5 | 65 | G3/4 | 1418*700*1500 | 395 | 2~10 | 0.01 | 0.01 | 260 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DBZY-15A | 1.05 | 1.58 | 11 | 65 | G3/4 | 1882*790*1731 | 560 | 2~10 | 0.01 | 0.01 | 500 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DBZY-20A | 1.51 | 1.58 | 15 | 65 | G3/4 | 1882*790*1731 | 572 | 2~10 | 0.01 | 0.01 | 500 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DMZY-15A | 1.05 | 1.58 | 11 | 65 | G3/4 | 1882*790*1731 | 560 | 2~10 | 0.01 | 0.01 | 500 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DMZY-20A | 1.52 | 1.58 | 15 | 65 | G3/4 | 1882*790*1731 | 572 | 2~10 | 0.01 | 0.01 | 500 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DMZY-30A | 2.41 | 1.58 | 22 | 68 | G3/4 | 1882*1081*1801 | 630 | 2~10 | 0.01 | 0.01 | 500 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DCZY-30A | 2.21 | 1.58 | 22 | 68 | G3/4 | 1882*1081*1801 | 630 | 2~10 | 0.01 | 0.01 | 500 |
Notes:1. A represents air-cooling type,W represents water-cooling
type;
2. Working Environment temperature: -5ºC~45ºC;
3. Discharge temperature is less than ambient temperature
+10ºC~15ºC;
4. Drive Mode: belt driven;
5. Startup Mode: direct start under 11kw, and above 11kw;
6. Work Power: 380V / 50HZ, 460V / 230V / 6KV and 10KV voltages can
be made for customers;
7. F.A.D volume flow test is according to ASMC PTC9 or ISO1217
standard (GB/T3853)