Active Member
|
[China]
Address: No.88,yingbin road,industrial development zone,botou city,hebei province
Contact name:Li
hebei feixiang roll forming machinery co,ltd; |
|
|
High-class pressed steel door frame forming machine manufacturer
1. Description
The door frame is one channel that can fix the door to the wall and to make the door is strong standing inside the wall of the house, the door frame machine we make is steel door frame. and we produce this kind door frame machines. The door frame machine is similar to other machines, including below parts: de-coiler, the leveling, the punching holes system, the roll forming machine, and the cutting system and the receiving table.
The door frame machine need cutting system to for the door frame forming system. and the door frame machine need the punching system because there are some holes on the door frame. so we designed the punching system before the main roll forming machine body.
2. Main Material used
Material: Color steel ,galvanized steel or Aluminum
Feeding width:300mm
Material thickness:0.8-1.5mm
Yield strength:235-450mpa
3. Machine composition
| Name | SET | Use TO |
| 3T Manual decoiler | 1 set | Loading the coil |
| Main forming machine and cutter | 1 set | forming the shape.Cutting the length as request. |
| PLC control system | 1set | 1.Language as request |
| Oil pump | 1 set | Make coolling as request |
| Product stand | 1 set | Stand finishing product |
| Remark | All equipment can order as customer’s request | |
4. Main parameters
Model number | High-class pressed steel door frame forming machine manufacturer |
Rolled material | 0.8-1.5mm thickness, aluminum sheet, galvanized sheet, colored steel sheet and various steel plates |
Effective width | 112mm 245mm |
Feeding width | 300mm |
Forming steps | 16 stations |
Roller | Cr12 hard chrome plating within 0.05mm |
Diameter of shaft | 60mm |
Main motor power | 11 kw |
Pump power | 5.5 kw |
Sprocket chain | 1 inch |
Drive type | by Gears |
Cutting Blade | Cr12, heat treatment 60-62°C |
Frequency Converter | It has the advantage of slowing down before cutting, to ensure the length accuracy (±1mm, far better than industrial standard ±3mm). |
component | 1 set of manual decoiler,1 set of main roll forming machine, 1 set of computer control cabinet, 1 set of hydraulic System,1 set of cutting mechanism, 1 set of counter,1 set of output table |
Payment terms | cash,T/T,L/C. |
Delivery time | 30 working days |
