Home Companies daoyi polymer co ltd

Low Density Anti Aging Non Toxic EPDM Rubber Crumb

Active Member

Contact Us

[China]

Address: #513, Jinhai Road, Ningbo City, Zhejiang Province

Contact name:Cen

daoyi polymer co ltd

Low Density Anti Aging Non Toxic EPDM Rubber Crumb

Country/Region	china
City & Province	ningbo zhejiang
Categories	Other Rubber Products

Product Details

odorless / Color Long-lasting / EPDM granules For KIDS / Rice shape

Product Description

Colored EPDM granules are made from a compound of Virgin EPDM rubber, specialist pigment and UV stabilizers. Blocks of the rubber compound are produced under carefully controlled factory conditions which are then granulated to small, unified crumbs of a definite size (fractional composition) at high speed. Dust is removed at every stage to ensure the finished granules are as clean as possible. Throughout the process, thorough testing ensures that the chemical and physical properties are of consistently high quality.

Technical data sheet

Descripion	EPDM Rubber Crumb
Color	red,green,blue,yellow and other colors

Items	Unit	Test Results
Tensile Strength	MPA	4-20
Density	g/cm³	1.05-1.15
Hardness Shore A	ShoreA	60A±2A
Tensile Elongation @Brk	%	300-780
Tear strength	KN/m	20-68

Advantages

1. Environmental protection and non toxicity: PGE material is thermoplastic polyester elastomer, without any vulcanization reagent. It has passed the FDA certification and met the material requirements for direct contact with food.

2. Economy and practicability: wide range of application temperature, - 50 ℃ - 80 ℃; excellent weather resistance, ozone and ultraviolet protection; bright colors and various combinations; good wear resistance. The strength and elongation change little after 500h aging test, which is far higher than the standard value. The service life of the runway made of this material is greatly prolonged for at least 10 years.

3. Safety protection. The physical performance of PGE material runway shows that it has excellent performance. The simulation test of the mobile robot shows that its shock absorption and vertical deformation are stable, which are in the middle of the optimal control range! It is especially suitable for large, middle, primary schools and kindergartens.

4. Environmental friendliness: the material has no peculiar smell, and the data of harmful substances are mostly undetected or far less than the standard value, which will not be harmed and polluted to the participants and the surrounding environment. If necessary, special treatment can be adopted to continuously release negative oxygen ions from the runway and improve the local air environment of the site.

5. 100% recovery: the biggest feature of this material is environmental protection. It can be recycled 5-6 times without obvious performance degradation, which meets the international environmental protection requirements. Recycling after 10 years of use is the biggest contribution to environmental friendliness, which solves the problem that solid waste cannot be treated after the runway of various materials is scrapped.

Quick question

Q:What is the life Span for Running track?

A:The life span is about 10-15years.

Q:What are the options for the base construction of a running track?

A:The ground is based on asphalt or concrete.

Q:What are the differences between yours and traditional EPDM?

A:Traditional EPDM is vulcanized, unable to be recycled, smelled granules. We named our material as PGE, which stands for Polyurethane Grapheme elastomer. PGE is odorless, long lasting color and could be recycled after 10 years-used.

Product picture