Steel Metal Box Gutter Roll Forming Machine With PLC Frequency Control

 1. Gutter cold roll forming machine can bend the roll formed pipe, and let the drainpipe and the bending connect to be the whole.The product after roll forming has long working time than the tranditional ppc pipe, and not aging. It can make the project more integrate, and help to enhance the image of the all project.

 2. Components of Gutter cold roll forming machine
Gutter cold roll forming machine is composed of uncoiler, the feed leading table, the main machine, the formation cutting device, hydraulic system, control system and the product bracket.

 1). 3Ton Manual Decoiler

  1. Decoiler Type: Manual type decoiler

  2. Weight capacity of decoiler: 3Ton

  3. Manual expanding

  4. Passive uncoiling

  5. 508mm, 610mm

 2). Main Roll Forming Part

  1. Forming Mateial Thickness: 0.4-0.8mm

  2. Forming Material Type: PPGI, Aluminum

  3. Machine Frame: high grade steel welded and tempering treatment

  4. Forming Structure: Guiding column + Slide blocks

  5. Forming Motor: 5.5KW

  6. Shaft Material: 45# high grade steel tempering treatment (HB220-260)

  7. Shaft Diameter: 65mm

  8. Bearing: HRB bearing (Top Chinese brand)

  9. Roller Material: 45# high grade steel, and roller surface with hard chrome ≥ 0.05mm

  10. Forming Speed: About 0-15m/min ( excluding cutting time )

  11. Forming Stations: About 16 stations

 3). Hydraulic Cutting & Hydraulic Station

  1. Cutting Type: Hydraulic cutting after roll forming, Burr-free cutting

  2. When cutting, Machine stop

  3. Cutting blades: 1SET

  4. Cutting blade material: Cr12Mov, Quench treatment, HRC58-62

  5. Hydraulic Station Power: 3KW

  6. Hydraulic Pressure: 10Mpa

  7. Solenoid Valve Voltage: 24V ( Safety Voltage )

  8. Cutting Tolerance: +/-1.5mm

 4). Electrical Control System

  1. Adopts PLC control technology, frequency adjust speed technology, realize the automatic production.

  2. Provide good man and machine screen, which can set the batches, plate length, and quantity.

  3. Operation type: Touching screen + Button

  4. Using encoder to calculate the number and measuring the length

  5. Electrical control: PLC frequency control system with touch screen

  6. PLC: PANASONIC Brand

  7. Encoder: OMRON Brand

  8. Size of PLC control board: 700mm (L) x 1000mm (H) x 300mm (W)

 5). Run-out Table

  1. It is used to support the finished panels

  2. Teh table we supply is 2 pieces with length of 2000mm, it can support panels with 10000mm at normal condition

  3. The frame of supporter is welded by square-steel

  4. Simple non-power table type