Active Member
|
[China]
Address: B-613，Tempo Business Building , Yangshe Town, Zhangjiagang City, Jiangsu Province, China 215600
Contact name:Yvonne Ding
Jiangsu Co-effort Mechanical&Electrical Technology Co., Ltd |
|
|
Automatic Galvanized Steel Trunking Cable Tray Roll Forming Machine with Punch
Main Technical Specifications
1. Finished products: 50-100x50--600with holes punching and width adjustable
2. Raw material request:G350Mpa cold rolled or hot rolled steel,galvanized steel
3. Material thickness:0.7mm-1.2mm
4. Whole line working speed:Max 9m/min
Technical Parameters of Cable Tray Roll Forming Machine
| No | ||
1
| Suitable Material | Colored Steel plate, Galvanized Board, Aluminum Plate |
2
| Width | 50-500mm |
| 3 | Length | Max 3000mm |
| 4 | Side Rail Height | 50-60mm |
| 5 | Production Capacity | 8-15m/min |
| 6 | Thickness | 0.7-1.5mm |
| 7 | Shaft material | High Grade No.45 Steel |
| 8 | Total power | 15kw |
9
| Voltage | 380V 50Hz 3phases |
| 10 | Dimension | 6500*1300*1100mm |
| 11 | Control system | PLC automatic control |
| 12 | Material of rollers | CR12 hard steel |
| 13 | Main structure | 350H steel |
Products Specifications and Dimensions: Clients need provide
drawings
Cable Tray Roll Forming Machine Main Components
| No | Equipment Name | Quantity | Motor Power (kw) |
| 1 | Decoiler | 1 set | |
| 2 | Forming Mill | 1 set | 19 |
| 3 | Roller Straightening Machine | 1 set | 7.5 |
| 4 | Servo Feeding Machine | 1 set | 4.4 |
| 5 | Power Transmission Rack | 1 set | 6 |
| 6 | Collection Table | 1 set |
Production Process and Struction of Cable Tray Roll Forming Machine
Decoiler → Leveling→ Feeding→ Punch Cutting → Forming → Collection
Table
Cable Tray Roll Forming Machine Performance Overview
Decoiler
Width of Strip: 500mm
Thickness of Strip: 1~2mm
Inner Diameter of coil stock: φ508mm
Outer Diameter of coil stock: φ1300mm
Max Load Capacity: 3T
Roll Forming Machine
20 Pass Forming Machine
Rolling forming Effective width ≤500 mm
Roll Diameter: φ 65 mm ,40Cr (hardening and tempering)
Main Drive Motor: 19Kw
Speed: 5~15m/min
Electric Elements Brand
| No | Items | Brand |
| 1 | PLC | Delta |
| 2 | HMI | WEINVIEW |
| 3 | Electric Elements | Schneider or Delixi |
| 4 | Bearing | HRB, WZS or LYC |
| 5 | Main Motor | Wannan motor |
| 6 | Servo Motor | Delta |
Remark:
The supplier ensures the integrity of the supply scope, in order to
meet the user's installation and operation requirements as the
principle, the supply requirements involved in the technical
specifications also serve as a supplement to the scope of this
supply. If the shortcomings are found in the installation,
commissioning and operation, the supplier will supplement them. The
hydraulic oil, gear oil, saw blade, cooling water tank, cable and
material used in commissioning shall be provided by Buyer.
Cable Tray Roll Forming Machine Pictures
FAQ
Q: Is the cable tray roll forming machine automatic?
A:Yes, we adopt advanced automatic control software achieving
information management for production.
Q: What's the material of cable tray roll forming machine rollers?
A:Our roll forming machines roller on each piece of machine is the
use of Cr12 or Cr12Mov steel Qenched for each roller, the roller
increases the hardness and long service life And the use of plating
technology roller surface treatment to improve the equipment of the
main performance.
