Active Member
|
[China]
Address: B-613，Tempo Business Building , Yangshe Town, Zhangjiagang City, Jiangsu Province, China 215600
Contact name:Yvonne Ding
Jiangsu Co-effort Mechanical&Electrical Technology Co., Ltd |
|
|
Light Duty Supermarket Storage Rack Roll Forming Machine
Description of Stroage Rack Roll Forming Machine
1. Manual coiler
power: manual uncoiler, maximum capacity 5T
Applicable to coil inner diameter: 508mm, applicable to coil
maximum outer diameter: 1000mm
The manual power supply expands the inner surface of the coil.
2. Flying saw cutting
1) Continuous cutting;
2) The blade material is Cr12, which has been quenched.
3) Welded frame, good rigidity.
4) The cutting frame is heat treated to avoid deformation of the
final product. Cut length tolerance ± 2 mm.
5) The cutting power is provided by the hydraulic station.
6) The final product can be cut according to the set length in PLC
controller, and the length is automatically measured by encoder.
When the final product reaches the set length, the machine will
stop automatically cutting the product. When this is done, the
machine will continue to run.
3. PLC control system
1) The system adopts delta programmable controller (PLC) to control
all work actions. The production quantity and the length of each
piece will be measured automatically. Easy to control roll forming
machine.
2) Delta frequency converter speed control technology to achieve
automatic production.
3) Enter the text screen and cancel the working data.
4) Friendly human-machine interface system, which can set the
batch, length and quantity of workpieces.
5) Encoder counting, with the function of counting and measuring
length.
6) Suitable power supply voltage: 380V / 50 Hz / 3 phase (can be
designed according to the buyer's requirements)
Components for punching storage rack upright roll forming machine
| Name | Quantity | Units | |
| Decoiler | 1 | Set | |
| Main Machine | Feeding device | 1 | Set |
| Roll forming system | 1 | Set | |
| Cut Equipment | 1 | Set | |
| Hydraulic system | 1 | Set | |
| Electric control system | 1 | Set | |
| Supporter/Automatic Stacker | 1 | Set | |
| NO. | Item | Unit | Parameter | Remark | |
1 | Material | Type |
galvanized sheet,mild steel,etc, | ||
| Strength of material sheet | Map | ≥350 | |||
| Thickness of material sheet | mm | 1.2~2.5 | customizable | ||
| 2 | Profile sizes | mm | See Figure | ||
| 3 | Production speed | m/min | 6~8 | customizable | |
| 4 | Material of roller | GCr15 quenching treatment | |||
| 5 | Drive type | Gearbox driven | |||
| 6 | Motor Power | kw |
About 45 | ||
| 7 | Electric control system | PLC variable frequency control | |||
| 8 | Dimensions(Length*width*height) | m | 35X4X3.9 | ||
| 1. Profile | .Thickness:2.0mm |
| 2. Process flow | Decoiling---feeding---leveling---punching---forming---cutting---production |
| 3. Manual decoiler | 1).Material coil inner diameter: 450mm-550mm |
| 4. Punching machine | 60t Automatic punch holes(with one set of mold) |
| 5. Forming system | 1).Number of forming steps:2 steps feeding rollers,4 steps leveling
rollers, 12steps forming rollers, |
| 6.Cutting system | 1).Material: blade and mold material: Cr12 steel with quenched
treated 60-62℃ |
| 7.Control system | 1). Screen: Delta screen from Taiwan |
| 8. Hydraulic | 1). Advanced hydraulic system from Taiwan |
| 9. Spare Parts | 1).Easy damaged parts: conk 2 pcs, fuse-link 4 pcs |
