|
[China]
Trade Verify
Address: NO.287 Guangyi Road,Liangxi District,Wuxi ,Jiangsu,China
Contact name:Emily
Wuxi Sylaith Special Steel Co., Ltd. |
|
Verified Suppliers
|
|
|
Cold Rolled DX51D S280GD Z275 Zero Spangle Galvanized Coil For Rolling Doors
Production Description
Surface treatment of galvanized coil:
Oiling can reduce the corrosion of steel plates under wet storage
and transportation conditions, and re-coating the steel plates and
steel strips after passivation treatment with oil will further
reduce the corrosion under wet storage conditions. The oil layer
should be able to be removed with a degreaser that does not damage
the zinc layer.
Lacquer seals provide an additional anti-corrosion effect, especially fingerprint resistance, by applying a very thin transparent organic coating film. Improves lubricity during molding and acts as an adherent primer for subsequent coats.
Specification
Thickness | 0.12-6.0mm or as required |
Width | 600-1500mm or as required |
Edge | Mill Edge Slit Edge |
Length | As your request |
Technique | Cold Rolled, Hot Rolled |
| Coil weight | 3-8MT/ Coil or as your request |
Zinc coated | 30-275g/ m2 |
Surface treatment | Chromated and oiled, and ant-ifinger |
Grade | Q195 Q235 Q345 SGCC SGCH SGC340 SGC400 SGC440 SGC490 SGC570 SGHC SGH340 SGH400 SGH440 SGH490 SGH540 DX51D DX52D DX53D DX54D DX55D DX56D DX57D S220GD S250GD S280GD S320GD S350GD S400GD S500GD S550GD |
Application | Pre-engineered steel buildings, industrial and commercial roofing
and cladding, agricultural buildings, building accessories, light steel framing, Quonset huts, construction tubular, appliance, and automotive |
Product Details
1: Can you send samples?
Of course, we can provide customers with free samples and express
shipping service to all over of the world.
2: What product information do I need to provide?
Please kindly provide the grade, width, thickness, surface
treatment requirement should you have and quantities you need to
purchase.
3. Do you make customized products based on our design drawings or
ideas?
Yes, we are a professional metal fabrication factory with an
experienced engineering team to make custom products according to
clients’ drawings and ideas.
4. What is the MOQ?
Usually we set 1 Ton MOQ, but the more, the cheaper. Besides, we
are happy to make prototype or sample for clients to ensure quality
standard.
