Shenyang Jingcheng Electromechanical Equipment Co., Ltd. Bazhou branch |
|
Automatic Cutting Machines Cold Flying Saw Feed Circular Cold Saw Tube and Tube Mills
Introduction
The design of the cold cutting flying saw is accurate and
reasonable. When cutting the pipe diameter online, it has good
safety, low noise, smooth incision, no deformation and burr. Tube
cuts are made to the highest quality standards, reducing
post-processing costs.
Material | Q195 Q235 SPCC | |
Cutting range | Round tube:MAX114mm | thick:0.5~4.0mm |
Square tube:MAX90×90mm | thick:0.5~4.0mm | |
Production speed | 80m/min(length 6 meter,dia.≤25mm) | |
Length tolerance | ±1.5mm(speed diviation not more than 2%); | |
Feeding direction | ||
Operation height | 800mm | |
Power supply | AC380V,3PH,50HZ |
Features
1. Equipped with adjustable cooling spray pipeline to flush the impurities and iron filings on the saw blade and clamping block;
2. Sawing method: saw blade and feed are adjustable, that is to say, the speed of the feed servo motor is variable, and the speed of the saw blade is variable, so that the utilization rate of the saw blade is greatly improved; and the saw blade wear protection system is provided.
3. The saw blade is equipped with a steel brush device to remove iron filings on the saw blade when rotating;
Our service
1. Professional pre-sales consultation and after-sales service to
help you find the best solution
2. Discuss technical details with our professional engineers
3. Strictly control the quality and production plan of the cold
flying saw. You will be kept informed of any progress
4. Check the cold flying saw before shipment
5. After the warranty period, spare parts are provided at cost
6. Professional engineers help you increase production, reduce
waste and reduce costs
7. Control the production progress and quality of the machine, and
provide you with detailed information in time