Jiangsu LCD Technology Co., Ltd |
|
Consists of the machine
This production line is composed of 3T manual feeding device, driving device, forming roller and main machine (including oriented platform), forming compaction device, forming cutting device, hydraulic system, electrical control system, output table and so on.
Technical datas
Material | Type | Pre-painted steel coil & galvanized coils |
Thickness (mm) | 0.4-0.6 | |
Yield strength (mpa) | 235-345 | |
Roller material | 45#Chrome steel | |
Forming speed(m/min) | About 8 | |
Speed adjusting mode | AC Frequency | |
Cutting mode | Hydraulic cutting | |
Cutter material | Cr12 mold steel with quenched trreatment | |
Length measurement | Encoder | |
Control mode | Mitsubishi PLC | |
Main motor power (kw) | 4kw (Depend on final design) | |
Hydraulic station power | 7.5 kw (Depend on final design) | |
Total power (kw) | 11.5kw |
Working procedure
Uncoiler—Feeding—roll forming--- hydraulic cut to length—output table
Machine production
This is machine includes a decoiler, feeding, leveling, main roll former. Hydraulic cutting and output table.
It is for producting downspout/down pipe, mainly color steel material, we can make the machine accoring to your requirements, both square pipe and round pipe.
Machine pictures