Stator Stack And Coil Insulation Powder Resin Epoxy Coating Equipment WIND-HDP

Stator stack and coil  powder resin Epoxy coating insulation equipment

 I. Design and production reference

II. Working process

1. Fix the stator (work piece) in the fixture, then put it inside the inductorium, 

2. Power on the machine, then the induction heater automatically begin

 working, the heat time could be set, when set time is reach heater

automatically stop, Normally the heater time is 10s

3. Fetch out the fixture,then dip both side in the power coating station, 

the stator is hot, and the fixture is in normal temperature and won’t burn you,

4. Dip the fixture in the power coating station both side, the dipping time is

 depened on stator stack thickness and powder’s character, 

For example,normally one side is 3s, then the other side 2s

5. After dipping, disassemble the fixture clean the fixture using a airgun to

 remove the remain power when necessary

6. Collect and put the stators into oven( the machine didn’t have a oven with it),

  the oven temperature need reach to 180～200℃ (depended on powder’s

 character), keep that temperature for more than 30 minutes

1. Machine is composed of heating,powder coating,powder cleaner and

powder recycle system with nice appearance and reasonable configuration,

the machine frame is made of 1.2mm A3 steel plate,

2. High frequency indution heater have the advantage of fast heating,

low energy, safety and reliability

3. Air blowing ensure well done in cleaning fixtures

4. Cooling on high frequency induction heater is freezing style water cooler

tank, it is well cooling

IV Machine configuration

Machine dimension  L2100×W1720×H2100 mm

1. 40KW high frequency induction heater 1PC

With Φ120mm inductorium 1PC

2. Cooling tank 1PC

With size L1000×W1000×H1000mm

3. 0.37KW Cooling water pump

4. Powder coating chamber  1SET

5. Powder recycle system (on back side of powder coating chamber) 1PC

V Power composition

Power : 12KW  380V±10%,50HZ

Compressed air : 0.3 m³/min 0.6Mpa

Question and answer

Armature Coating Manual Fluidizing Machine Fluidized Powder Bed Insulation.

Please inform:

1. The dimensions of the powder bath in which the part is immersed.

   It is custom made and related to your product and how many pieces you want to produce per day

2. Is it possible to supply equipment without an inductor?

Yes, if your product don't need to heat up by induction method before powder coating , it can be done by a oven

3. Does the delivery include a compressor for cleaning the product?

Air gun is inclued to clean the resin/powder remain

Contact: emily@motor-machinery.com

Skype: motor.machinery

Mobile: +86-18067425780

Website: http://www.motor-machinery.com; http://www.coilswinding.com

Hot dip stator coil powder coating machine 3M powder coater from Wind Automation on Vimeo.