Active Member
|
[China]
Address: F13, Block 2, Baolong industrial park, Baohe Road, Longgang district, Shenzhen, China
Contact name:Li
Shenzhen dingshen Industrial Co., Ltd |
|
|
9dBi 340MHz High Gain Directional Yagi antenna
| Specification | Model: DS-ANTDYG |
| Frequency Range-MHz | 340±10 |
| Bandwidth-MHz | 20 |
| Gain-dBi | 9 |
| Beamwidth-° | 53 |
| F/B ratio-dB | 14 |
| VSWR | ≤1.5 |
| Polarization | Vertical |
| Max Power-W | 150 |
| Nominal Impedance-Ω | 50 |
| Connector | N(optional) |
| Antenna Dimension-m | 1.2 |
| Weight (kg) | 2.0 |
| Work Temperature-°C | -30~60 |
| Rated Wind Velocity-m/s | 60 |
| Explain | 5 Units |
Antenna Erection
1 Fix the wave director and the oscillator in a counterpoint ( please take notice that the drain hole of oscillator should be downward).
2 Erect the antennas to the pole with clamp according to polarization required.
3 Connect the RF cables well, and wrap up the connector with waterproof adhesive tape, and do not let the cable flutter in the wind.
4 Make a shield for protection the water back into the home before RF cables were acrossed indoor.
