|
[China]
Trade Verify
Address: NO.68,HUAQIAO ROAD, LIN'AN, HANGZHOU, ZHEJIANG, CHINA
Contact name:James
HANGZHOU ZION COMMUNICATION CO., LTD |
|
Verified Suppliers
|
|
|
1310-1550nm 2/3/5/7/10 dB SC LC FC ST/APC UPC Low Insertion Loss High Return Loss OPTIC ATTENUATOR
ST 3dB Fiber Optical Attenuator
| Zion Code | Zion Description | |||||||
| 7236010 | ST 3dB Fiber Optical Attenuator | |||||||
Applications
ZION COMMUNICATIONS’ Fiber Optic Attenuator is a kind of optical device that can reduce the energy of optical signal. It is used to attenuate the input optical power and avoid the distortion caused by the optical receiver due to the super strong input optical power.Fiber Optic Attenuator, as a kind of optical passive device, is used for debugging optical power performance, debugging and calibration of optical fiber instrument in optical communication system, and optical fiber signal attenuation. The product is made of attenuating fiber doped with metal ions, which can adjust the optical power to the required level.Mainly used in: optical fiber communication system; optical fiber CATV; high-power optical device measurement; used to attenuate the input optical power, avoiding the distortion of the optical receiver due to the super-strong input optical power.Communication Co., Ltd. have high attenuation precision, low additional loss and good stability., and wide operating temperature. It is your best choice.
| Connector Type | LC, SC, FC, ST | |||||||
 | LC optical fiber attenuator: used in LC optical fiber interface, the connector to connect SFP module, it is made by the easy-to-operate modular jack (RJ) latch mechanism. (Routers are commonly used) | |||||||
 | SC optical fiber attenuator: applied to SC optical fiber interface, it looks very similar to RJ-45 interface, but the SC interface is flatter, the obvious difference is the contact piece inside, if it is 8 thin copper contacts, then It is an RJ-45 interface, if it is a copper column, it is an SC fiber interface. | |||||||
 | FC optical fiber attenuator: applied to FC optical fiber interface, the external strengthening method is a metal sleeve, and the fastening method is a turnbuckle. Generally used on the ODF side (most used on the distribution frame) | |||||||
 | ST optical fiber attenuator: applied to ST optical fiber interface, commonly used in optical fiber distribution frame, the shell is round, and the fastening method is turnbuckle. (For 10Base-F connection, the connector is usually ST type. Often used in optical fiber distribution frames) | |||||||
| Parameter | FC, SC, LC,ST |
| Operating Wavelength(nm) | 1310-1550 |
| Insertion Loss (dB) | ≤ 0.6 |
| Return Loss (dB) | ≥45 |
| Repeatability (dB) | ≤ 0.2 |
| Resolution (dB) | ≤ 0.1 |
| Wavelength dependent loss(dB) | WDL≤ 0.3(CorLBand) |
| Polarization dependent loss(dB) | PDL≤ 0.2 |
| Temperature dependent loss(dB) | TDL≤ 0.2 |
| Tolerance for 1-5dB Attenuation(dB) | ±0.5 |
| Tolerance for 6-30dB Attenuation(nm) | ±10 |
| Mating Durability(cycle) | ≥1000 |
| Response time(dB/ms) | 3 |
| Attenuation control accuracy(dB) | ±0.5 |
| Supply voltage(DC) | ± 5V |
| Operating Temperature (℃) | -5 ~ +65 |
| Storage Temperature (℃) | -40 ~ +75 |
All Dielectric, Stranded Loose tube ADSS Cable, G.652.D, Polyethylene (PE) | AT(anti-tracking)Sheath,
Gel-filled, Self-supporting, Aramid Yarn| KEVLAR
FTTH (fiber to the home) networks are installed in many areas covering indoor and outdoor sections and the transition in between.
24/48/96/144 cores IP55 to IP68 PP/PC/PC+ABS Heat-shrink seal/Mechanical seal INLINE OPTIC SPLICE CLOSURE
Fiber Optical Terminal Box 4/8/12/16/24/48/96 cores IP55 to IP68 ABS/ABS+PC/PP+glassfiber Mini/Module PLC Splitter OPTIC TERMINAL BOX
FTTX project, Data processing centers/Cable television (CATV),Other applications in Fiber optical systems
SC LC FC ST/APC UPC 0.9/2.0/3.0mm Single Mode/Multimode PVC/LSZH Fiber Optic patch cord/pigtails.
MPO Female To MPO Female SM 3.0mm LSZH 12 Fibers MPO Patch Cord Custom Meters
1*4/1*8/1*16/1*32 Single Mode/Multimode with SC LC FC ST/APC UPC connectors FBT/PLC OPTIC SPLITTER
Low insertion loss · Wide pass band · High channel isolation 1.02±0.05 mm HDPE · High stability and reliability Modified Polyethylene · Epoxy free on optical path PET Foil
SC LC FC ST/APC UPC SX/DX/QUAD 0.9/2.0/3.0mm Welding Symmetry Plastic/Hybrid OPTIC ADAPTER/COUPLER
1310-1550nm 2/3/5/7/10 dB SC LC FC ST/APC UPC Low Insertion Loss High Return Loss OPTIC ATTENUATOR
SC LC FC ST/APC UPC SX/DX 0.9/2.0/3.0mm Pre-polished Ferrule/FAST Field Assembly OPTIC PATCH CONNECTOR
Cabling Infrastructure
24/26AWG CAT5E/CAT6/CAT6A/CAT7/CAT8 UTP/FTP/SFTP CCA/BC PVC/LSZH RJ45 FU to 50U Copper Patch Cord
Bulk CAT 5e cables,
CAT 6 cables, CAT 6a cables,
CAT7 cables, Cat 8 cables, etc.
VE/603/IDC/601S/PE/TE series SPCC Cold Rolled Steel High Loading Capacity Server/Network Rack Cabinet
SE/EW/SA/SB/SQ/VA series SPCC Cold Rolled Steel High Excellent Compression Wall Mount Rack Cabinet
CAT5E/CAT6/CAT6A 0.5/1/2U 8/12/24/25/48/50/72 ports UTP/FTP blank patch panel matching 19"/10" cabinets
CAT5E/CAT6/CAT6A 0.5/1/2U 8/12/24/25/48/50/72 ports UTP/FTP blank patch panel matching 19″/10″ cabinets
Fit into a standard keystone wall plate or patch panel, allowing for easy and flexible installation in a variety of networking environments
