HELLOSIGNAL CONTROL TM / TM CY |
|
▉ Application |
HELLOSIGNAL® CONTROL TM is a multi-conductor cable designed for use on machine tool equipment and other industrial machinery conforming to NFPA 79 wiring norms. HELLOSIGNAL® CONTROL TM is also UL/CSA TC approved so it can be routed in tray as well. HELLOSIGNAL® CONTROL TM CY has foil tape and a tinned copper braid shield for improved effectiveness against noise and interference. |
▉ Recommended Applications |
Machine tool machinery; food & beverage; processing equipment; machine wiring for conformance to NFPA 79 |
▉ Unshielded Construction |
Conductors: Finely stranded bare copper |
Insulation: Specially formulated PVC/nylon |
Jacket: Specially formulated thermoplastic polymer; gray |
▉ Shielded Construction |
Conductors: Finely stranded bare copper |
Insulation: Specially formulated PVC/nylon |
Shielding: Foil tape and tinned copper braid (85% coverage) |
Jacket: Specially formulated thermoplastic polymer; gray |
▉ Application Advantage |
• Conforms to NFPA 79 standards for wiring machinery • Gray jacket and number-coded for easy connection • UL TC-ER approval so it can be installed off the machine and into an overhead tray without conduit • Flexible copper stranding and pressure-extruded jacket, improved shielding effectiveness |
▉ Technical data |
Minimum Bend Radius | for installation : 4 x cable diameter |
for shielded : 6 x cable diameter |
Temperature Range | UL/CSA TC : 25°C to +90°C | 25°C to +90°C | | |
for stationary use: | 40°C to +105°C | | |
for flexible use: | 25°C to +90°C | | |
|
| | | | | | | | |
| | | | | | | | |
▉ Technical data |
Nominal Voltage | UL/CSA TC : | 600V | | |
UL WTTC: | 1000V | | |
Test Voltage | 2000V |
Conductor Stranding | Class 5 fine wire |
* 18 AWG meets only Class 5 cross section and DC resistance |
Color Code | Black with white numbers, plus green/yellow ground |
Approvals | UL: | TC-ER per UL 1277 |
MTW per UL 1063 |
WTTC per UL 2277 |
Bus Drop Cable |
(14 AWG & larger; 3c & 4c only) |
AWM 20886 & 21098 (Oil) |
Attributes: | UL Oil Res I/II NFPA 79 |
75°C Wet; 90°C Dry |
Sunlight Resistant |
Direct Burial |
NFPA 79 |
NEC: | Class 1, Division 2 per |
NEC Article 501 |
Canada: | c(UL) CIC/TC FT4 CSA AWM I/II A/B FT4 |
|
Additional: | Torsion rated for Wind Market |
(± 90°/m) & (± 150°/m) |
CE & RoHS |
| | | | | | | | |