Active Member
|
[China]
Address: 167 Yuxiang Street, Shijiazhuang, Hebei province, China
Contact name:Gina
Shijiazhuang Coal Mining Machinery Co., Ltd. |
|
|
SPC-600 truck-mounted drilling rig for 600m water or geological well
SPC series truck-mounted drilling rig is the rotary table thpe drilling rig, all the parts including the diesel power, gear box, reducing box, hoist, rotary table, mud pump and derric are all mounted on the chassis. The main transfer is made by mechanically, some parts are controlled by hydraulic.
The chassis is from Sinotruk, robust and has service center in 53 countries.
It is mainly used for the drilling of water well, hydrogeological exploration, grouting, the shallow coal seam and other construction holes.
features
1. the drilling rig is with a 17m long mast, the useful height is 15m, 9m drilling pipes can be used.
2. the drilling rig have two same winch, that means both the master and slave winch have 30tons lifting capacity, in this way, it is more easier to change the drilling pipes.
3. double power, the drilling rig can use the engine of the chassis and two motors are mounted on the chassis, when the electricity is available, it can use the electricity to make the drilling.
4. The derrick will be erected by a hydraulic cylinder and the machine is supported by hydraulic outriggers,
5. The main control of the rig is air controlled. The air from the air compressor is used for the mud pump clutch, the winch clutch, the turntable clutch, the hoisting clutch of main and auxiliary winch.
| Model | SPC-1000 | SPC-600 |
| Overall dimensions mm | 14200×2550×4000 | 13900×2550×4000 |
| Total weight t | 26 | 30 |
| Crew/operator | 2 | 2 |
| Chassis | TAZ5415TXJ | TAZ5325TXJB |
| Driving method | 8×4 | 6×4 |
| Max. traveling speed km/h | 80 | 78 |
| Min. truning dia. m | 29 | 20 |
| Grand clearance (full load) mm | 314 | 300 |
| Max. gradability(full load) | 32% | 32% |
| Braking distance at 30km/h | ≤10 | ≤10 |
| The hole dia. mm | 520 | 520 |
| Hole depth mm | 1000 | 600 |
| Kelly bar mm | 108×108×10500 | 108×108×10500 |
| Drilling pipe mm | 89×9500 | 89×9500 |
| Power model | SC13G310D2+G0219 | MC07.28-50 Y250M-4 |
| Powercapacity kW | 227 | 206 55×2 |
| Hole dia. of Rotary table mm | 520 | 520 |
| Rotatry speed of rotary table r/min | 23 40 69 110 182 219 23(reverse) | 22 39 65 101 145 190 23(reverse) |
| Rotary table form | Hydraulic | Mechinical winding |
| Add and relief pressure to feed mechanism kN | 350/220 | 300( relief) |
| Add and relief pressure stroke mm | 10800 | 10800 |
| Shackle max. torque kN.m | 60 | / |
| Single rope pulling force of hoist kN | 70(master) 1.5( slave) | 50(master) 50(slave) |
| Rope hole capacity of hoist m | 150/φ22 | 150/φ18 |
| Speed on the second floor m/s | 1.9 | 1.1 1.8 |
| Hoist model | 3NB-130 | 3NB-130 |
| Max. flow of mud pump L/min | 1000 | 1000 |
| Max. pressure of mud pump MPa | 10 | 10 |
| The bearing capacity of derric t | 60 | 40 |
| Efficient height of derric m | 15 | 15 |
