Yuhuan Dici Machinery Co., Ltd. |
|
Premier Laboratory OEM Gas Regulator Stainless Steel Regulator
KLFU SS regulator, stable outlet pressure, mainly used for high
input pressure requirements.
The max pressure reaches to 6000 PSI, suitable for pure gas, standard gas, corrosive gas, etc.
Connection type | Weld |
Media | Ammonia, nitrogen, oxygen, hydrogen, liquefied gas, air, water, Steam, oil,arious highly corrosive chemical gas, weak acid and alkali media |
Structure type | Groshong |
Pressure | Ordinary |
Work temp | Cold, normal, high |
Standard | National |
Flow direction | Single |
Drive mode | Manual operation |
Type | Straight through |
Seal form | Sealed |
Customized | Yes |
Inlet pressure | 0.5~22MPa |
Inlet thread | G5/8, W21.8, CGA320, customized |
Inlet seal form | Ball hard seal |
Outlet pressure | 0-10MPa |
Outlet thread | 6mm hose, 8mm hose, 10mm hose,pagoda and customized |
Stainless steel regulator description
■Design feature
●Piston type decompression structure●Female thread: 1/4" NPT●Built-in filter●Panel mount & wall mount
■Application ●Lab ●Gas analysis test ●Flow control ●Test equipment
■Characteristic
●Max intlet pressure: 3000PSI; 6000PSI ●Output pressure: 0~250,0~500,0~1500,0~3000PSI
●Safe test pressure: 1.5 times of the max input pressure ●Temp: -18℉~+165℉(-40℃~+74℃)
●Leak rate: foam test ●CV: 0.06 ●Weight: 0.9 kg
What problems should be paid attention to when purchasing valve fittings?
1. Provide product model and specification. As the product model designs can be set by the manufacturer
independently, the same product may have multiple models, which means that the same product has
different models from different manufacturers. It is best to display the pictures or samples when buying.
2. Provide the material of product, which is inseparable from the price.
3. Provide product connection method (compression sleeve type, welding type, thread type, flange type,
clamp type, etc.) and sealing form (soft seal, hard seal), which is important to whether the product you
purchase is connected and sealed with your equipment or pipeline.
4. Provide the product structure requirements.
5. Provide the medium (gas, liquid, gas-liquid mixture, etc.)
6. Provide the temperature range of the medium (normal temperature
-20~80 degrees, high temperature
81~600 degrees, low temperature -21~-200 degrees)
7. Provide the product operation mode (manual, electric, pneumatic,
gas-liquid linkage)
8. Provide the pressure and flow direction of the product medium.
9. Provide your logo.
10. Prodide the pressure range of the product.