Active Member
|
[China]
Address: Building A, Canbo Technology Park, Huafa North road, Gongming Town, Shenzhen, China
Contact name:Judy
JH Electric Co., Ltd |
|
|
Single Output LED switching power supply 15W 5V 3A Transformer AC to DC Converter
Features:
1. Reliable quality and good price
2. High efficiency and low working temperature
3. Built-in EMI filter
4. 100% full-load burn-in test
5. Protection: Over load protection, short circuit protection
Specification:
Model number | S-15-5 | S-15-12 | S-15-24 |
DC Output Voltage | 5V | 12V | 24V |
Output Voltage Error | ± 2% | ± 1% | ± 1% |
Rated Output Current | 3A | 1.3A | 0.7A |
Output Current Range | 0-3A | 0-1.3A | 0-0.7A |
Ripple and Noise | 100mVp-p | 50mVp-p | 50mVp-p |
Inlet Stability | ± 0.5% | ± 0.5% | ± 0.5% |
Load Stability | ± 1% | ± 0.2% | ± 0.5% |
DC Output Power | 15W | 15.6W | 16.8W |
Efficiency | 70% | 74% | 76% |
Adjustable Range for DC Voltage | +10%, -5% | ± 10% | ± 10% |
AC Input Voltage Range | 85~132VAC/170~264VAC selected by switch 47~63Hz; 240~370VDC | ||
Input Current | 0.5A/115V 0.25A/230V | ||
AC Inrush Current | Cold-Start Current: 15A/115V, 30A/230V | ||
Leakage Current | <0.55mA/240VAC | ||
Overload Protection | 105%~150% Type: Cut Output, Reset: Auto Recovery | ||
Temperature Coefficient | ± 0.020% /°C (0~50°C) | ||
Start, Rise, Hold time | 200ms, 100ms, 30ms | ||
Vibration | 10~500Hz, 2G 10min, /1 cycle, a total of 60 minutes, Each axes | ||
Withstand Voltage | Input and Output Interval: 1.5KVAC, Input and Enclosure: 1.5KVAC, Output and Enclosure: 0.5KVAC | ||
Isolation Resistance | Input and Output Interval: Input and Enclosure, Output and Enclosure: 500VDC/100M Ohms | ||
Working Temperature and Humidity | -10°C~+60°C (Refer to Output Derating Curve), 20%~90%RH | ||
Store Temperature and Humidity | -20°C~+85°C, 10%~95%RH | ||
Dimension | 99*97*35mm | ||
Weight | 0.3kg | ||
Safety Standards | Meet UL 1012 requirement (Not apply for the mark) | ||
EMC Standards | Meet FCC Part 15J Condition class B | ||
1.The testing condition for the parameter above is: 230VAC input, rated load, 25°C 70%RH, Humidity . 2. Error, include the setting error, line stability and load stability. 3. Wave test: adopting "A12" twisted pair wire for 20MHz, and 0.1uF-47uF capacitor short-circuit for interrupting . 4. Inlet Voltage Stability test: when it is over load, the lowest voltage of inlet is representative to the highest voltage . 5. Load stability test: the load is from 0% to 100% .
Dimension unit:mm
