Active Member
|
[China]
Address: Building A, Canbo Technology Park, Huafa North road, Gongming Town, Shenzhen, China
Contact name:Judy
JH Electric Co., Ltd |
|
High quality 150W 13.5V 11.2A Single Output switching power supply
AC to DC
Features:
1. Reliable quality and good price
2. High efficiency and low working temperature
3. Built-in EMI filter
4. 100% full-load burn-in test
5. Protection: Over load protection, short circuit protection
Specification:
Model number | S-150-5 | S-150-7.5 | S-150-9 | S-150-12 | S-150-13.5 | S-150-15 | S-150-24 | S-150-27 | S-150-48 |
DC Output Voltage | 5V | 7.5V | 9V | 12V | 13.5V | 15V | 24V | 27V | 48V |
Output Voltage Error | ± 2% | ± 1% | ± 1% | ± 1% | ± 1% | ± 1% | ± 1% | ± 1% | ± 1% |
Rated Output Current | 30A | 20A | 16.7A | 12.5A | 11.2A | 10A | 6.5A | 5.6A | 3.2A |
Output Current Range | 0-30A | 0-20A | 0-16.7A | 0-12.5A | 0-11.2A | 0-10A | 0-6.5A | 0-5.6A | 0-3.2A |
Ripple and Noise | 150mVp-p | 150mVp-p | 120mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 75mVp-p |
Inlet Stability | ± 0.5% | ± 0.5% | ± 0.3% | ± 0.3% | ± 0.3% | ± 0.3% | ± 0.2% | ± 0.2% | ± 0.2% |
Load Stability | ± 0.5% | ± 0.5% | ± 0.3% | ± 0.3% | ± 0.3% | ± 0.3% | ± 0.2% | ± 0.2% | ± 0.2% |
DC Output Power | 150W | 150W | 150.3W | 150W | 151.2W | 150W | 156W | 151.2W | 153.6W |
Efficiency | 80% | 80% | 80% | 82% | 83% | 84% | 85% | 86% | 87% |
Adjustable Range for DC Voltage | 4.5-5.5V | 6-8.3V | 8-10.4V | 10.6-13.2V | 12-15V | 13.5-16.5V | 21-28V | 24-30V | 43-53V |
AC Input Voltage Range | 85~132VAC/176~264VAC selected by switch 47~63Hz; 248~370VDC | ||||||||
Input Current | 3.2A/115V 1.6A/230V | ||||||||
AC Inrush Current | Cold-Start Current: 30A/115V, 60A/230V | ||||||||
Leakage Current | <3.5mA/240VAC | ||||||||
Overload Protection | 105%~150% Type: Cut Output, Reset: Auto Recovery | ||||||||
Over Voltage Protection | 115%~135% | ||||||||
Temperature Coefficient | ± 0.03% /°C (0~50°C) | ||||||||
Start, Rise, Hold time | 100ms, 50ms, 20ms | ||||||||
Vibration | 10~500Hz, 2G 10min, /1 cycle, a total of 60 minutes, Each axes | ||||||||
Withstand Voltage | Input and Output Interval: 1.5KVAC, Input and Enclosure: 1.5KVAC, Output and Enclosure: 0.5KVAC | ||||||||
Isolation Resistance | Input and Output Interval: Input and Enclosure, Output and Enclosure: 500VDC/100M Ohms | ||||||||
Working Temperature and Humidity | -10°C~+60°C (Refer to Output Derating Curve), 20%~90%RH | ||||||||
Dimension | 199*98*38 mm | ||||||||
Weight | 0.7kg | ||||||||
Safety Standards | UL 1950 TUV EN60950 Approved | ||||||||
EMC Standards | CISPR22(EN55022), IEC1000-4-2, 3, 4, IEC1000-3-2 Verification | ||||||||
1. The testing condition for the parameter above is: 230VAC input,
rated load, 25°C 70%RH, Temperature
.
2. Error, include the setting error, line stability and load
stability.
3. Wave test: adopting "A12" twisted pair wire for 20MHz, and
0.1uF-47uF capacitor short-circuit for
interrupting .
4. Inlet Voltage Stability test: when it is over load,
the lowest voltage of inlet is representative to the highest
voltage .
5. Load stability test: the load is from 0% to 100% .
Dimension unit:mm
