Active Member
|
[China]
Address: 23M,Shidai Bldg.,Linyuan road,Mianyang,sichuan
Contact name:Mr. gus zhang
Mianyang Prochema Commercial Co.,Ltd. |
|
PFA lining sheet, PFA anticorrosive sheet/board , PFA semiconductor sheet
PFA( Perfluoroalkoxy alkane) it kept a PTFE excellent chemistry stability, low, high temperature resistance, dielectric property, self-lubricating, anti-sticking, , ageing resistance, folding and cracking resistance are the outstanding characteristic of it, its mechanical strength in high temperature is more than 1.6 times as PTFE.
Properties :
High low temperature resistance:-200--260°C,high temperature strength is 2 times higher than PTFEGood adhesive and heat sealability with PTFE
Below melting point ,it won’t stick any project.Above melting point, it has perfect adhesive property with PTFE, Metal and self-adhesion(heat sealing).
None stick to water ,oil :water contact angle:θ=1150oElectric reliability,High dielectric60HZ-60MHZ ,Under the high and low temperature,thepermittivitykeeps 2.1 even if the surface damaged ,it won’t has conductive track.
Volume resistance>1018ΩMSurface resistance>2*1013ΩVoltaic Arc Resistance>165s No electric leakageWeather resistance:It can be used in sunlight and ozone longAnti-corrosion:Only in high temperature,Fluorin
and alkaliscan effect it,others acid,alkali or ester won’t effect it.
Fireproof :If firing, and will still insulate .
High diaphaneity
UL-Resistance :Good penetrability in ultraviolet radiation,and lowest refraction coefficient
Easy to process for second time self-close, self-turning
Specification:
Standard:
0.5mm to 150mm
regular size : 150x300 mm200mm× 200mm300x300mm400mm× 400mm500x500mm
0.5-4mm Max width 1200mm
Technology dataPFA | ||
Items | Properties | Indicators |
physical properties | specific gravity(g/cm³) | 2.12~2.17 |
melting point(°C) | 302~312 | |
melt index(g/10min) | 5~25 | |
electrical properties | tensile strength(Mpa) | 27~29 |
elongation at break(%) | 250~300 | |
rigidity(SH) | D60~70 | |
coefficient of kinetic friction | 0.2 | |
mechanical properties | volume resistivity(Ω.CM) | ≥10 18 |
insulated breaking voltage(0.2mm)/(mv/m) | 20 | |
dielectric constant 1MHz | 2.1 | |
dielectric loss angle tangent 1MHz | ≤0.003 | |
Application:
· Coating cable
· Valve and pump linings
· Insulating bushings
· Release applications
· Pharmaceutical industry
· Semi-conductor industry
LiningBearing pads,anticorrosiveseals,electrical insulation, inner tubelining,anticorrosive gasket,fireproof sheet, High-low temperature sheet, semiconductor protected parts
Technology requirements:
Surface smooth, flat, no pinhole, no bubble, no impurity, edge smooth and flat
