Home Companies Kunshan Ruijun Machinery Co., Ltd.

Window XP System Wire Cutting Machine , Wire Edm Machine With LED Inside Light

Contact Us

[China]

Trade Verify

Address: No88 Suhang Road Shipai Kunshan Suzhou China

Contact name:David Gao

Kunshan Ruijun Machinery Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Window XP System Wire Cutting Machine , Wire Edm Machine With LED Inside Light

Country/Region china
City & Province suzhou jiangsu

Product Details

wire cutting machine price FH300C New Design

 

Wire Edm Machine​ Standard Configuration:


1) Window XP System with Auto-CAD software control System.
2) PANASONIC converter ( Japan Panasonic )
3) "C" Structure HTK Casting Machine Body ( Japan HTK )
4) Standard DRO and Z axis motorized drive up and down.
5) Hiwin brand linear guide way install on XYZUV 5 axis ( P lever )

6) Hiwin brand ball screw install on XYZUV 5 axis ( C3 lever )
7) Automatic center lubrication system. (Not manual )
8) LED Inside light (Not outside bulb)
9) Automatic double direction wire tension system
10) Standard ±6 degree taper cutting system
11) PHILIPS Industrial Computer (Philips Europe)
12) Automatic parameter generating system.


Cooperate Suppliers:
Linear guide way and ball screw supplier (HINWIN Taiwan)
Bearing supplier (NSK Japan )
Motor, Driver and Electric accessories supplier ( SIEMENS German)
Electric accessories supplier ( NCC Japan )
Transducer (converter) ( PANASONIC Japan)
Servo driver supplier ( YASKAWA Japan )
Handle Remote supplier (EUCHNER German )
Industrial control system supplier (PHILIPS Europe)

 

Wire Edm Machine​ Featurers:


1) Parameter is not required to put in, Artificial Intelligence works out perfect parameter 
immediately after putting in cutting thickness and wire diameter, Different accuracy based on different workers with different experience will be solved.  

2) Roughness: Ra ≤0.8um
3) 3 Time Cutting thickness : ≥200mm

4) Max Machining Speed: 200mm2/min

Factory Situation:

 

1). More than 1500 Sets Wire Cut Machine can be sold out in Chinese market each year.
2). Over 8000 sets EDM machines installed in China or other countries.
3). 8 steps checking for each machine by more than 25 QCS.
4). 20 years experience on EDM Machines (From 1997) , 300 employees.
5). 20 research personnel for developing new models or accessories.

 

Wire Edm Machine​ Parameters

 

ItemunitFR-400G/M/SFR-600G/M/SFR-700G/M/S
Worktable size (L×W)mm550*680680*940720*1040
Table travel(X×Y)mm300*400400*600450*700
Max. work piece thicknessmm250300300
U.V axismm     20*20 20*20 20*20

Max. taper angle/plate thickness

degree/mm

±6°/80mm      G model

±12°/80mm    M model

 ±6°/80mm       S model 

Motor type

step or servo

 G model     Step motor

 M model     Step motor

   S model     Servo motor

Wire diametermm0.16-0.200.16-0.200.16-0.20
Machine accuracyOctagonmm  ±0.005  ±0.005  ±0.005
Anglemm   0.0120.0120.012
Roughness, thrice cuttingum≤0.8≤0.8≤0.8
Max. machining speedmm²/min200200200
Machine dimensions(W×L×H)mm1160*1650*18501540*1920*20201730*2020*2080
Machine weightKg150020002300
Controller dimensions(W×L×H)Mm600*800*1800600*800*1800600*800*1800
Wire traveling speedm/min5-115-115-11
Load of tableKg350500600
Rated PowerKVA333
Water tank dimension(W×L×H)mm580*960*660580*960*660580*960*660
Working reservoir capacityL150150150

 

Wire Edm Machine​ Introduction


Considering the main problems existing in the old type Fast Speed wire cut machine such as low cutting precision, bad surface finishing and slow cutting speed, while the brass wire cut machine is much more expensive and difficult to learn, we develop the second generation Middle Speed Wire Cutting machine based on the technology from Brass wire cut machine, deeply improves the cutting precision, surface finishing (Ra≤0.8um), cutting speed to make the cutting life and technology almost same as brass wire cut machine. But the machine's purchase cost is much lower than brass wire cut machine, the operator who has a little experience of fast speed wire cut machine can use our machine immediately. Comprehensive efficiency is 2 or 3 time as fast speed wire cut machine.

We adopt 6 sets high lever linear guide way on the traveling system including X,Y axis and other running accessories, X,Y axis adopts 2 sets high level ball screw. Wire Swing system: the first company adopt linear guide way, make the travel move smoothly without any obstruction, it make sure the swing without any wear, solve the big obstruction, big wear, etc problem from the V shape guide way.Tape or Angle part: UV axis tape unit has got national patent, patent number:2L2008200332261. Perfect design high lever tape unit, make high accuracy for moving and tape cutting. Wire Tension System: National patent number: 2L200820000226.7. Adopt double direction wire tension system, keep the wire tension with same strength during the working time, which can protect the wire and reduce the wire broken possibility.

 

Hot Products

edm wire cutting machine FR-400G New Design Standard Configuration: 1) Window XP System with Auto...
edm FR400G New Design The wire cutting machine could be contacted to the computer control system,and ...
cnc edm wire cut machine FR-400G New Design Standard Configuration: 1) Window XP System with Auto...
EDM wire cut FR400G New Design Main Use of Automatic High Speed EDM CNC Wire Cutting Machine: It ...
edm wire cut FR400G New Design Standard Configuration: 1) Window XP System with Auto-CAD software ...
Medium Speed Metal Wire Cutting Machine With Overall Protective Structure Machine Body FR-400/G FR...