Active Member
|
[China]
Address: No88 Suhang Road Shipai Kunshan Suzhou China
Contact name:David Gao
Kunshan Ruijun Machinery Co., Ltd. |
|
|
drilling edm MS-DZ340A
1) Max Z axis travel is 380mm, can install max 500mm length brass tube.
2) Z axis move up and down very quick, travel from bottom to topside only need 10 second.
3) Max drilling speed is much faster.
4) Adopt air pump, which is better than BZ-103T and BZ-103A.
5) Brass tube consume is only 1/3 of normal brand machine.
6) Max distance between guide and work table is 320mm.
7) When you get the machine, you will find the design is better, cover and electric parts are stronger .
Product Application
The machine tools are applicable to the threading holes for wire cutting, injection holes for oil pump, spinning holes for chemical fiber spinning plates, oil-way holes for hydraulic-pneumatic equipments, group holes for filter plates and since plates, cooling holes for motors and deep pinholes difficult process in traditional methods.
Feature:
1. Fast processing speed and low consumption
2. Install numerical display device
3. Ultra thickness: main axis travel 380, applying to thick part
processing.
4. Ultra travel: servo travel 380, lengthened electronic pole is
available and 15% of pole saving
5. Z-axis with high efficiency and good stability.
6. X and Y axis uses ball bearing lead screw easy to ensure feeding
precision.
7. The angle of main axis is adjustable for angling hole
processing.
8. Electronic fluctuating and easy operation.
Electrode diameter | 0.2---3.0mm |
Max Drilling Speed | 100mm/min |
Z1 axis travel | 250mm |
Z2 axis travel(Servo Motor Travel) | 370mm |
Rotation speed of rotary head | 20~120rpm |
Working table size | 400×700mm |
Working table travel | 400×300 mm |
Max. distance between guide and working table | 320mm |
Height of working table above the ground | 900mm |
Max. processing current | 30A |
Max. power consumption | 3.0 KVA |
Power supply | 380V/50HZ |
Filter Type | Shallow Seam Type |
Max working solution pressure | 8 ( Mpa ) |
Max table load | 250 kg |
Method of working fluid filter | Thread gap |
Controller type | Automatic Z axis |
Capacity of working fluid tank | 30L |
Machine size | 1000×1000×2000 mm |
Digital Display | DRO for X,Y,Z-axis |
Machine weight | 700kg |
