|
[China]
Trade Verify
Address: No. 3, Huyue Road,Luhe District,Nanjing,China
Contact name:Danny
Nanjing Unitec Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
UT620E Edge Banding Machine
This edge banding machine is suitable for straight edge banding of solid wood board, fiberboard, particleboard and other board workpieces, the edge sealing material can be solid wood strip, PVC, melamine, veneer, etc. Imported motor and high quality electrical components.Product serialization and diversified customer selection. High precision and efficiency.
Features: Automatic Pvc Edge Banding Machine Woodworking For Wood
1: New desIgn for the band clamping device, perfectly preventing
the band from losing its track.
2: Four irregular cylindrical pinch rollers can entirely press the
band firmly to the board.
3: Nonadjustment of the cutters of fine trimming & scraping
units, pneumatically position, higher precision and higher
productivity.
| Model | HD620J | HD620LL | HD620 |
| Electric lifting | ● | ● | ● |
| Total power | 14.5kw | 20.6kw | 9.5kw |
| Overall size | 5400×900×1600mm | 5206×900×1600mm | 4470×900×1600mm |
| Feed speed | 14-20-23m/min | 14-20-23m/min | 14-20-23m/min |
| Edge thickness | 0.4-3mm | 0.4-3mm | 0.4-3mm |
| Panel thickness | 10-60mm | 10-60mm | 10-60mm |
| Panel length | ≥120mm | ≥120mm | ≥120mm |
| Panel width | ≥60mm | ≥60mm | ≥60mm |
| Min.work-piece length(without using pri-miling) | |||
| Min.work-piece length(using pri-miling) | |||
| Working pressure | 0.6Mpa | 0.6Mpa | 0.6Mpa |
| Minimum sheet size | 300(L)×30(W)mm 150(L)×150(W)mm | 300(L)×30(W)mm 150(L)×150(W)mm | 300(L)×30(W)mm 150(L)×150(W)mm |
Advantages:
✺ Pre-milling equipment with double trimming blades works on the waved effect that is caused by precise sliding table saw.
✺ The gluing mechanism adopts a special structure to gelatinize the plates and costing materials unifiormly, ensure a more solid
conglutination.
✺ End trimming mechanism through a precise guide track movement, adopt automatic tracking and high frequency motor fast cutting
structure to ensure the cutting surface smoothly.
✺ Rough/Fine trimming mechanism used for repairing the excess edge materials, adopt automatic tracking and high frequency motor
fast cutting structure to ensure the trimming plates smoothly.
✺ Corner trimming unit is to make the board ending more smooth and aesthetic.
✺ Scraping unit for a perfect finishing of the applied edge.
✺ The buffing device adopts the board processed by cotton polishing wheel, by end polishing to make a more smooth surface.✺ Pre-milling equipment with double trimming blades works on the waved effect that is caused by precise sliding table saw.
✺ The gluing mechanism adopts a special structure to gelatinize the plates and costing materials unifiormly, ensure a more solid
conglutination.
✺ End trimming mechanism through a precise guide track movement, adopt automatic tracking and high frequency motor fast cutting
structure to ensure the cutting surface smoothly.
✺ Rough/Fine trimming mechanism used for repairing the excess edge materials, adopt automatic tracking and high frequency motor
fast cutting structure to ensure the trimming plates smoothly.
✺ Corner trimming unit is to make the board ending more smooth and aesthetic.
✺ Scraping unit for a perfect finishing of the applied edge.
✺ The buffing device adopts the board processed by cotton polishing wheel, by end polishing to make a more smooth surface.
